PIC16C432-E/SS Microchip Technology, PIC16C432-E/SS Datasheet - Page 45

• Manufacturer Part Number: PIC16C432-E/SS
• Description: IC MCU CMOS 8BIT 20MHZ 2K 20SSOP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C432-E/SS

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: LIN (Local Interconnect Network)
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 12
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 20-SSOP
• For Use With: XLT20SS-1 - SOCKET TRANSITION 18DIP 20SSOPAC164307 - MODULE SKT FOR PM3 28SSOPAC164029 - MODULE SKT PROMATEII 20DIP/SSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -

9.0
Special circuits to deal with the needs of real-time
applications are what sets a microcontroller apart from
other processors. The PIC16C432 device has a host of
such features intended to maximize system reliability,
minimize cost through elimination of external compo-
nents, provide power saving operating modes and offer
code protection.
These are:
1.
2.
3.
4.
5.
6.
7.
8.
2002 Microchip Technology Inc.
OSC Selection
RESET
Power-on Reset (POR)
Power-up Timer (PWRT)
Oscillator Start-Up Timer (OST)
Brown-out Reset (BOD)
Interrupts
Watchdog Timer (WDT)
SLEEP
Code Protection
ID Locations
In-circuit Serial Programming
SPECIAL FEATURES OF THE
CPU
Preliminary
The PIC16C432 has a Watchdog Timer which is
controlled by configuration bits. It runs off its own RC
oscillator for added reliability. There are two timers that
offer necessary delays on power-up. One is the
Oscillator Start-up Timer (OST), intended to keep the
chip in RESET until the crystal oscillator is stable. The
other is the Power-up Timer (PWRT), which provides a
fixed delay of 72 ms (nominal) on power-up only, and is
designed to keep the part in RESET while the power
supply stabilizes. There is also circuitry to reset the
device if a brown-out occurs, which provides at least a
72 ms RESET. With these three functions on-chip,
most applications need no external RESET circuitry.
The SLEEP mode is designed to offer a very low
current Power-down mode. The user can wake-up from
SLEEP through external RESET, Watchdog Timer
wake-up, or through an interrupt. Several oscillator
options are also made available to allow the part to fit
the application. The RC oscillator option saves system
cost, while the LP crystal option saves power. A set of
configuration bits are used to select various options.
9.1
The configuration bits can be programmed (read as ’0’),
or left unprogrammed (read as ’1’), to select various
device configurations. These bits are mapped in
program memory location 2007h.
The user will note that address 2007h is beyond
the user program memory space. In fact, it belongs
to the special
(2000h – 3FFFh), which can be accessed only during
programming.
Configuration Bits
test/configuration
PIC16C432
DS41140B-page 43
memory
space