PIC16C925-I/PT Microchip Technology, PIC16C925-I/PT Datasheet - Page 145

• Manufacturer Part Number: PIC16C925-I/PT
• Description: IC MCU OTP 4KX14 LCD DVR 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C925-I/PT

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Type: OTP
• Ram Size: 176 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC16C
• No. Of I/o's: 25
• Ram Memory Size: 176Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• No. Of Pwm Channels: 1
• Embedded Interface Type: I2C, SPI
• Rohs Compliant: Yes
• Processor Series: PIC16C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 176 B
• Interface Type: I2C, SPI
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 3
• Operating Supply Voltage: 2.5 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 5 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DVA16PQ640 - ADAPTER DEVICE FOR MPLAB-ICEAC164023 - MODULE SKT PROMATEII 68TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: PIC16C925I/PT

15.1
PIC16LC925/926
PIC16C925/926
D025
D025
D026
D026
Note 1: This is the limit to which V
Param
2001 Microchip Technology Inc.
No.
(Commercial, Industrial)
(Commercial, Industrial)
† Data in "Typ" column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only
2: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O pin load-
3: The power-down current in SLEEP mode does not depend on the oscillator type. Power-down current is
4: For RC osc configuration, current through R
5: The
6: PWRT must be enabled for slow ramps.
7:
DC Characteristics
and are not tested.
ing and switching rate, oscillator type, internal code execution pattern, and temperature also have an impact on
the current consumption.The test conditions for all I
measured with the part in SLEEP mode, with all I/O pins in hi-impedance state and tied to V
mated by the formula Ir = V
added to the base I
circuitry. This does not include current dissipated by the LCD panel.
I
I
Sym
T
AD
LCDT
1
OSC
current is the additional current consumed when this peripheral is enabled. This current should be
1 and
OSC1 = external square wave, from rail to rail;
all I/O pins tri-stated, pulled to V
MCLR = V
Characteristic
Timer1 Oscillator
Timer1 Oscillator
LCDRC
PIC16LC925/926
PIC16LC925/926
PIC16C925/926
PIC16C925/926
A/D Converter
A/D Converter
DD
DD
includes the current consumed by the LCD Module and the voltage generation
or I
.
DD
PD
(Continued)
DD
measurement.
can be lowered in SLEEP mode without losing RAM data.
/2R
EXT
Standard Operating Conditions (unless otherwise stated)
Operating temperature
Standard Operating Conditions (unless otherwise stated)
Operating temperature
Min
—
—
—
—
(mA) with R
Preliminary
Typ† Max Units
DD
1.0
1.0
EXT
—
—
is not included. The current through the resistor can be esti-
DD
EXT
50
50
—
—
measurements in active operation mode are:
in kOhm.
A
A
A
A
-40°C
-40°C
V
V
A/D on, not converting
A/D on, not converting
DD
DD
0°C
0°C
= 3.0V
= 4.0V
PIC16C925/926
T
T
T
T
A
A
A
A
+85°C for industrial
+70°C for commercial
+85°C for industrial
+70°C for commercial
Conditions
DS39544A-page 143
DD
and V
SS
.