AT32UC3L064-AUT Atmel, AT32UC3L064-AUT Datasheet - Page 691

• Manufacturer Part Number: AT32UC3L064-AUT
• Description: MCU AVR32 64KB FLASH 48TQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L064-AUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TQFP, 48-VQFP
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: SPI/TWI/USART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: AT32UC3L-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 9-ch x 10-bit
• Package: 48TQFP
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

28.7.21
Name:
Access Type:
Offset:
Reset Value:
• FSOURCES: Force Discharge Current Sources
• GLEN: Global Enable
• INTVREFSEL: Internal Voltage Reference Select
• INTREFSEL: Internal Reference Select
• TRIM: Reference Current Trimming
• SOURCES: Enable Discharge Current Sources
32099F–11/2010
GLEN
31
23
15
7
-
When FSOURCES[n] is 0, the corresponding discharge current source behavior depends on SOURCES[n].
When FSOURCES[n] is 1, the corresponding discharge current source is forced to be enabled continuously. This is useful for
testing or debugging but should not be done during normal acquisition.
0: The current source module is globally disabled.
1: The current source module is globally enabled.
0: The voltage for the reference resistor is generated from the internal band gap circuit.
1: The voltage for the reference resistor is VDDIO/3.
0: The reference current flows through an external resistor on the DIS pin.
1: The reference current flows through the internal reference resistor.
This field is used to trim the discharge current. 0x00 corresponds to the minimum current value, and 0x1F corresponds to the
maximum current value.
When SOURCES[n] is 0, the corresponding discharge current source is disabled.
When SOURCES[n] is 1, the corresponding discharge current source is enabled at appropriate times during acquisition.
Discharge Current Source Register
30
22
14
6
-
-
DICS
Read/Write
0x5C
0x00000000
29
21
13
5
-
-
28
20
12
4
-
FSOURCES[7:0]
SOURCES[7:0]
27
19
11
3
-
TRIM
26
18
10
2
-
AT32UC3L016/32/64
INTVREFSEL
25
17
9
1
INTREFSEL
24
16
8
0
691