PIC18F2480-I/SP Microchip Technology, PIC18F2480-I/SP Datasheet - Page 289

• Manufacturer Part Number: PIC18F2480-I/SP
• Description: IC PIC MCU FLASH 8KX16 28DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F2480-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 16KB (8K x 16)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 25
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: SPI/I2C/MSSP/EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 4
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DM163011, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Height: 3.3 mm
• Length: 34.67 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2 V
• Width: 7.24 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DVA18XP280 - DEVICE ADAPTER 18F2220 PDIP 28LD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 24-6:
REGISTER 24-7:
REGISTER 24-8:
© 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-5
bit 4
bit 3
bit 2
bit 1-0
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
R/W-x
SID10
R/W-x
R/W-x
EID15
SID2
SID<10:3>: Standard Identifier bits (if EXIDE (TXBnSIDL<3>) = 0)
Extended Identifier bits EID<28:21> (if EXIDE = 1).
SID<2:0>: Standard Identifier bits (if EXIDE (TXBnSIDL<3>) = 0)
Extended Identifier bits EID<20:18> (if EXIDE = 1).
Unimplemented: Read as ‘0’
EXIDE: Extended Identifier Enable bit
1 = Message will transmit extended ID, SID<10:0> become EID<28:18>
0 = Message will transmit standard ID, EID<17:0> are ignored
Unimplemented: Read as ‘0’
EID<17:16>: Extended Identifier bits
EID<15:8>: Extended Identifier bits (not used when transmitting standard identifier message)
EID14
R/W-x
R/W-x
R/W-x
SID9
SID1
TXBnSIDH: TRANSMIT BUFFER n STANDARD IDENTIFIER REGISTERS,
HIGH BYTE [0 ≤ n ≤ 2]
TXBnSIDL: TRANSMIT BUFFER n STANDARD IDENTIFIER REGISTERS,
LOW BYTE [0 ≤ n ≤ 2]
TXBnEIDH: TRANSMIT BUFFER n EXTENDED IDENTIFIER REGISTERS,
HIGH BYTE [0 ≤ n ≤ 2]
W = Writable bit
‘1’ = Bit is set
W = Writable bit
‘1’ = Bit is set
W = Writable bit
‘1’ = Bit is set
R/W-x
R/W-x
R/W-x
EID13
SID8
SID0
PIC18F2480/2580/4480/4580
EID12
R/W-x
R/W-x
SID7
U-0
—
U = Unimplemented bit, read as ‘0’
U = Unimplemented bit, read as ‘0’
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
‘0’ = Bit is cleared
‘0’ = Bit is cleared
EXIDE
R/W-x
R/W-x
R/W-x
EID11
SID6
R/W-x
R/W-x
EID10
SID5
U-0
—
x = Bit is unknown
x = Bit is unknown
x = Bit is unknown
R/W-x
R/W-x
EID17
R/W-x
SID4
EID9
DS39637D-page 289
EID16
R/W-x
R/W-x
R/W-x
SID3
EID8
bit 0
bit 0
bit 0