HD64F3672FPIV Renesas Electronics America, HD64F3672FPIV Datasheet - Page 100

• Manufacturer Part Number: HD64F3672FPIV
• Description: MCU 3/5V 16K I-TEMP PB-FREE 64-L
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3672FPIV

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SCI
• Peripherals: PWM, WDT
• Number Of I /o: 26
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• For Use With: R0K436079S000BE - KIT DEV FOR H8/36079 W/COMPILER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 6 Power-Down Modes
6.2
Figure 6.1 shows the possible transitions among these operating modes. A transition is made from
the program execution state to the program halt state of the program by executing a SLEEP
instruction. Interrupts allow for returning from the program halt state to the program execution
state of the program. A direct transition from active mode to active mode changes the operating
frequency. RES input enables transitions from a mode to the reset state. Table 6.2 shows the
transition conditions of each mode after the SLEEP instruction is executed and a mode to return
by an interrupt. Table 6.3 shows the internal states of the LSI in each mode.
Rev.4.00 Nov. 02, 2005 Page 74 of 304
REJ09B0143-0400
Notes: 1. To make a transition to another mode by an interrupt, make sure interrupt handling is after the interrupt
Program halt state
Standby mode
Mode Transitions and States of LSI
Reset state
2. Details on the mode transition conditions are given in table 6.2.
is accepted.
SLEEP
instruction
Interrupt
Figure 6.1 Mode Transition Diagram
Program execution state
Active mode
SLEEP
instruction
Direct transition
interrupt
Interrupt
SLEEP
instruction
Interrupt
Program halt state
Subsleep mode
Sleep mode