HD64F3687FPIV Renesas Electronics America, HD64F3687FPIV Datasheet - Page 184

• Manufacturer Part Number: HD64F3687FPIV
• Description: MCU 3/5V 56K I-TEMP PB-FREE 64-L
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3687FPIV

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI
• Peripherals: PWM, WDT
• Number Of I /o: 45
• Program Memory Size: 56KB (56K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• For Use With: R0K436079S000BE - KIT DEV FOR H8/36079 W/COMPILER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 10 Realtime Clock (RTC)
10.4
10.4.1
The RTC registers that store second, minute, hour, and day-of week data are not reset by a RES
input. Therefore, all registers must be set to their initial values after power-on. Once the register
setting are made, the RTC provides an accurate time as long as power is supplied regardless of a
RES input.
10.4.2
Figure 10.3 shows the procedure for the initial setting of the RTC. To set the RTC again, also
follow this procedure.
Rev.5.00 Nov. 02, 2005 Page 150 of 500
REJ09B0027-0500
Operation
Initial Settings of Registers after Power-On
Initial Setting Procedure
Set RTCCSR, RSECDR,
RMINDR, RHRDR,
RWKDR, 12/24 in
RTCCR1, and PM
RUN in RTCCR1 = 0
RUN in RTCCR1 = 1
RST in RTCCR1 = 1
RST in RTCCR1 = 0
Figure 10.3 Initial Setting Procedure
RTC operation is stopped.
RTC registers and clock count
controller are reset.
Clock output and clock source are
selected and second, minute, hour,
day-of-week, operating mode, and
a.m/p.m are set.
RTC operation is started.