PIC16C782/JW Microchip Technology, PIC16C782/JW Datasheet - Page 59

• Manufacturer Part Number: PIC16C782/JW
• Description: IC MCU EPROM 2KX14 COMP 20CDIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C782/JW

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: EPROM, UV
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x8b; D/A 1x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 20-CDIP (0.300", 7.62mm) Window
• For Use With: DVA16XP202 - ADAPTER DEVICE PIC16C781/782DM163012 - BOARD DEMO PICDEM FOR 16C781/782AC164028 - MODULE SKT PROMATEII 20SOIC/DIP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Connectivity: -
• Other names: Q1137459

REGISTER 6-1:
2001 Microchip Technology Inc.
bit 7
bit 6
bit 5-4
bit 3
bit 2
bit 1
bit 0
TIMER1 CONTROL REGISTER (T1CON: ADDRESS 10h)
bit 7
Legend:
R = Readable bit
- n = Value at POR
Unimplemented: Read as '0'
TMR1GE: Timer1 Gate Enable bit
If TMR1ON = 0:
This bit is ignored
If TMR1ON = 1:
1 = Timer1 is on if T1G pin is low
0 = Timer1 is on
T1CKPS<1:0>: Timer1 Input Clock Prescale Select bits
11 = 1:8 Prescale value
10 = 1:4 Prescale value
01 = 1:2 Prescale value
00 = 1:1 Prescale value
T1OSCEN: LP Oscillator Enable Control bit
If INTRC w/o CLKOUT is selected in the configuration word, oscillator is active:
1 = LP oscillator is enabled for Timer1 clock
0 = LP oscillator is off
Else:
This bit is ignored
T1SYNC: Timer1 External Clock Input Synchronization Control bit
TMR1CS = 1:
1 = Do not synchronize external clock input
0 = Synchronize external clock input
TMR1CS = 0:
This bit is ignored. Timer1 uses the internal clock when TMR1CS = 0.
TMR1CS: Timer1 Clock Source Select bit
1 = External clock from pin RA6/OSC2/CLKOUT/T1CKI (on the rising edge)
0 = Internal clock (F
TMR1ON: Timer1 On bit
1 = Enables Timer1
0 = Stops Timer1
U-0
—
TMR1GE T1CKPS1 T1CKPS0
R/W-0
OSC
/4)
R/W-0
Preliminary
W = Writable bit
’1’ = Bit is set
R/W-0
T1OSCEN
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared
R/W-0
PIC16C781/782
T1SYNC TMR1CS TMR1ON
R/W-0
x = Bit is unknown
R/W-0
DS41171A-page 57
R/W-0
bit 0