AT91M42800A-33AI Atmel, AT91M42800A-33AI Datasheet - Page 18

• Manufacturer Part Number: AT91M42800A-33AI
• Description: IC ARM7 MCU 144 TQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91M42800A-33AI

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SPI, UART/USART
• Peripherals: WDT
• Number Of I /o: 54
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• For Use With: AT91EB42 - KIT EVAL FOR ARM AT91M42800A
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

8.4.4
8.4.5
8.5
8.5.1
8.5.2
18
User Peripherals
AT91M42800A
PIO: Parallel I/O Controller
SF: Special Function
USART: Universal Synchronous/Asynchronous Receiver Transmitter
TC: Timer/Counter
The interrupt controller is connected to the NFIQ (fast interrupt request) and the NIRQ (standard
interrupt request) inputs of the ARM7TDMI processor. The processor’s NFIQ line can only be
asserted by the external fast interrupt request input: FIQ. The NIRQ line can be asserted by the
interrupts generated by the on-chip peripherals and the external interrupt request lines: IRQ0 to
IRQ3.
The 8-level priority encoder allows the customer to define the priority between the different NIRQ
interrupt sources.
Internal sources are programmed to be level sensitive or edge triggered. External sources can
be programmed to be positive or negative edge triggered or high- or low-level sensitive.
The AT91M42800A has 54 programmable I/O lines. I/O lines are multiplexed with an external
signal of a peripheral to optimize the use of available package pins. These lines are controlled
by two separate and identical PIO Controllers called PIOA and PIOB. Each PIO controller also
provides an internal interrupt signal to the Advanced Interrupt Controller and insertion of a sim-
ple input glitch filter on any of the PIO pins.
The AT91M42800A provides registers that implement the following special functions.
The AT91M42800A provides two identical, full-duplex, universal synchronous/asynchronous
receiver/transmitters that interface to the APB and are connected to the Peripheral Data
Controller.
The main features are:
The AT91M42800A features two Timer/Counter blocks, each containing three identical 16-bit
Timer/Counter channels. Each channel can be independently programmed to perform a wide
range of functions including frequency measurement, event counting, interval measurement,
pulse generation, delay timing and pulse-width modulation.
Each Timer/Counter (TC) channel has 3 external clock inputs, 5 internal clock inputs, and 2
multi-purpose input/output signals that can be configured by the user. Each channel drives an
• Chip Identification
• RESET Status
• Programmable Baud Rate Generator with External or Internal Clock, as well as Slow Clock
• Parity, Framing and Overrun Error Detection
• Line Break Generation and Detection
• Automatic Echo, Local Loopback and Remote Loopback channel modes
• Multi-drop mode: Address Detection and Generation
• Interrupt Generation
• Two Dedicated Peripheral Data Controller channels
• 5-, 6-, 7-, 8- and 9-bit character length
1779ES–ATARM–14-Apr-06