Z8F042AHH020SC00TR Zilog, Z8F042AHH020SC00TR Datasheet - Page 9

• Manufacturer Part Number: Z8F042AHH020SC00TR
• Description: IC ENCORE XP MCU FLASH 4K 20SSOP
• Manufacturer: Zilog
• Series: Encore!® XP®r

Specifications of Z8F042AHH020SC00TR

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: IrDA, UART/USART
• Peripherals: Brown-out Detect/Reset, LED, LVD, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 17
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 20-SSOP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: Z8F042AHH020SC00T

Errata for Date Codes 0352 and Before 0426
The errata listed in
products with date codes 0352 and before 0426, where the date code is YYWW (year and week of
assembly). The Z8 Encore! XP F082A Series includes the following devices: Z8F042A, Z8F041A,
Z8F022A, Z8F021A, Z8F012A, and Z8F011A. When reviewing the following errata, refer to the most
recent version of the product specification. Data contained in this document is Preliminary only. Refer to
the product specification for the supported memory configurations.
Table 5. Z8 Encore! XP
UP006912-0308
Sl
No. Summary
1
2
3
4
5
IPO frequency out of
specification over
voltage and
temperature.
LPO sink current is
less than specified in
the product
specification.
Temperature
sensor absolute
error exceeds
specification.
Writes to the TPOL
bit must be done
twice when the timer
is not enabled.
Programmable pull-
up resistors source
less than the
specified current.
0352 and Before 0426
Table 5
®
are found in the pre-production Z8 Encore! XP F082A Series 20- and 28-pin
Description
The IPO frequency is specified to be 5.5296 MHz +/- 4% over the supply
voltage range of 2.7 V to 3.6 V and the temperature range of
-40 °C to +105 °C. Actual silicon performance is +/-4% only over a supply
voltage range of 3.15 V to 3.45 V and a temperature range of 0 °C to +70 °C.
Workaround
If the application requires better than +/-4% oscillator accuracy, the voltage
and temperature must be controlled such that they remain within the ranges
given above.
The sink current may drop below 1 µA over temperature and supply voltage.
Workaround
An external pull-down resistor will improve the sink current performance.
The temperature sensor absolute error is outside the specification over the full
temperature/voltage range.
Workaround
Recalibrate the sensor at the user application temperature or use the
temperature sensor output for relative measurements.
When the timer is not enabled, the TPOL bit does not affect the timer output
when changed.
Workaround
When the timer is not enabled, write the Timer Control Register 1 twice with
the same value. This will cause the correct timer output behavior to occur.
The pull-up devices are specified to source at least 30 µA. In actuality, the pull-
up devices may source as little as 7 µA.
Workaround
If a faster pull-up is required, use an external pull-up resistor.
F082A Series Errata (20- and 28-pin) Devices with Date Codes
Errata for Z8 Encore! XP
®
F082A Series
Page 9 of 14