MCP1725-5002E/SN Microchip Technology, MCP1725-5002E/SN Datasheet - Page 15

• Manufacturer Part Number: MCP1725-5002E/SN
• Description: IC LDO REG 500MA 5.0V 8SOIC
• Manufacturer: Microchip Technology

Specifications of MCP1725-5002E/SN

• Regulator Topology: Positive Fixed
• Voltage - Output: 5V
• Voltage - Input: Up to 6V
• Voltage - Dropout (typical): 0.21V @ 500mA
• Number Of Regulators: 1
• Current - Output: 500mA (Min)
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Primary Input Voltage: 5.35V
• Output Voltage: 5V
• Dropout Voltage Vdo: 210mV
• No. Of Pins: 8
• Output Current: 500mA
• Voltage Regulator Case Style: SOIC
• Operating Temperature Range: -40°C To +125°C
• Number Of Outputs: 1
• Polarity: Positive
• Input Voltage Max: 6 V
• Output Type: Fixed
• Dropout Voltage (max): 0.35 V at 500 mA
• Line Regulation: 0.05 % / V
• Load Regulation: 0.5 %
• Voltage Regulation Accuracy: 2 %
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Output Voltage Fixed: 5V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3.6
3.6.1
For adjustable applications, the output voltage is
connected to the ADJ input through a resistor divider
that sets the output voltage regulation value. This
provides the user the capability to set the output
voltage to any value they desire within the 0.8V to 5.0V
range of the device.
3.6.2
For fixed output voltage versions of the device, the
SENSE input is used to provide output voltage
feedback to the internal circuitry of the MCP1725. The
SENSE pin typically improves load regulation by
allowing the device to compensate for voltage drops
due to packaging and circuit board layout.
© 2007 Microchip Technology Inc.
Output Voltage Sense/Adjust
Input (ADJ/Sense)
ADJ
Sense
3.7
The V
LDO. A minimum output capacitance of 1.0 µF is
required for LDO stability. The MCP1725 is stable with
ceramic,
capacitors. See Section 4.3 “Output Capacitor” for
output capacitor selection guidance.
3.8
The 2x3 DFN package has an exposed pad on the
bottom of the package. This pad should be soldered to
the Printed Circuit Board (PCB) to aid in the removal of
heat from the package during operation. The exposed
pad is at the ground potential of the LDO.
OUT
Regulated Output Voltage (V
Exposed Pad (EP)
pin(s) is the regulated output voltage of the
tantalum
and
MCP1725
aluminum-electrolytic
DS22026B-page 15
OUT
)