MTFDBAC050SAE-1B1 Micron Technology Inc, MTFDBAC050SAE-1B1 Datasheet
MTFDBAC050SAE-1B1
Specifications of MTFDBAC050SAE-1B1
Related parts for MTFDBAC050SAE-1B1
MTFDBAC050SAE-1B1 Summary of contents
Page 1
P200 2.5-Inch SATA NAND Flash SSD MTFDBACxxxSAE Features • Micron ® SLC NAND Flash • RoHS-compliant package • SATA 3 Gb/s interface • ATA modes supported – PIO mode 3, 4 – Multiword DMA mode – Ultra ...
Page 2
Part Numbering Information Micron’s P200 SSD is available in different configurations and densities. Visit part numbers. Figure 1: Part Number Chart Micron Technology Product Family FD = Flash drive Drive Interface B = SATA 3 Gb/s Drive Form Factor AC ...
Page 3
General Description Micron’s RealSSD™ solid state drive (SSD) uses a single-chip controller with a SATA 3 Gb/ s interface on the system side and n-channels of Micron NAND Flash internally. Pack- aged in an HDD replacement enclosure, the SSD integrates ...
Page 4
Architecture The 200-series SSD is a NAND Flash storage device. A SATA 3 Gb/s interface connects to the SSD externally and communicates with the controller. The controller manages data transfers to and from the NAND Flash array. Table 1: P200 ...
Page 5
Interface Connectors The SATA signal segment interface cable has four conductors and three ground connec- tions. As shown in Package Dimensions, the cable includes a 7-pin signal segment and a power segment arranged in a single row with a 1.27mm ...
Page 6
Figure 3: Micro SSD Interface Connections PDF: 09005aef83687473 realssd_p200_2_5.pdf - Rev Power Signal segment segment 6 Micron Technology, Inc. reserves the right to change products or specifications without notice. P200 2.5-Inch NAND Flash SSD Architecture ...
Page 7
Device ID Table 6: IDENTIFY Device ID • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the ...
Page 8
Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...
Page 9
Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...
Page 10
Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...
Page 11
Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...
Page 12
Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...
Page 13
Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...
Page 14
Table 6: IDENTIFY Device ID (Continued) • The content of the word is fixed and does not change • The content of the word is variable and may change depending on the state of the device ...
Page 15
Commands Table 7: Supported ATA Command Set See ATA-7 standard for command details Command Name CHECK POWER MODE DEVICE CONFIGURATION RESTORE DEVICE CONFIGURATION FREEZE LOCK DEVICE CONFIGURATION IDENTIFY DEVICE CONFIGURATION SET DOWNLOAD MICROCODE EXECUTE DEVICE DIAGNOSTIC FLUSH CACHE FLUSH CACHE ...
Page 16
Table 7: Supported ATA Command Set (Continued) See ATA-7 standard for command details Command Name SET FEATURES SET MAX ADDRESS SET MAX – FREEZE LOCK SET MAX – LOCK SET MAX ADDRESS EXT SET MULTIPLE MODE SET MAX – SET ...
Page 17
Reliability Micron’s SSDs incorporate advanced technology for defect and error management. They use various combinations of hardware-based error correction algorithms and firm- ware-based static and dynamic wear-leveling algorithms. Over the life of the SSD, uncorrectable errors may occur. An uncorrectable ...
Page 18
Electrical Characteristics Table 11: SATA Typical Power Consumption 3 Density Idle 25GB 0.15 50GB 0.15 1. Data taken at 25°C. Notes: 2. IOMETER MAX transfer rate with 128KB transfer size. 3. DIPM enabled. Table 12: Absolute Maximum Ratings Parameter/Condition Voltage ...
Page 19
Compliance Micron SSDs comply with the following: • RoHS “green” • CE (Europe): EN55022, 2006 Class B and EN55024, 1998 + A1: 2001 + A2:2003 • FCC: CFR Title 47, Part 15, ICES-003, all Class B • UL (US): approval ...
Page 20
Package Dimensions Figure 4: 2.5-Inch Package (Preliminary ...
Page 21
References • Serial ATA: High-speed serialized AT attachment, Serial ATA working group, available at www.sata-io.org • Small Form Factor Specification SFF-8201, SFF-8223 • Electronic Industries Association Standard, EIA-720 • Serial ATA: High-speed serialized AT attachment, Serial ATA working group • ...