TMEB8704 Atmel, TMEB8704 Datasheet - Page 15

• Manufacturer Part Number: TMEB8704
• Description: KIT DEMO FOR RFID TRANSPONDERS
• Manufacturer: Atmel
• Type: Development kitr

Specifications of TMEB8704

• Contents: Board, Cables, Manual and more
• For Use With/related Products: e5530, T5552, T5557, TK5530, TK5551, TK5552, U2270B
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.4
4781A–RFID–10/05
TK5551 Read/Write Transponder
Figure 5-8.
When the transponder TK5551 is selected, the Read tab of the TK5551 user interface is shown.
This window enables setting the following parameters in the Configuration Setup (on the left
side):
Note:
To change the Configuration Setup, click the Configure Transponder button to program the con-
figuration block of the transponder. (The transponder should be placed close to the RFID
application kit antenna.)
Read Timing on the right side enables the setting of the timing parameters for decoding. Under
normal operating conditions, the default values can be used.
• Bit rate: Rf/8, Rf/16, Rf/32, Rf/40, Rf/50, Rf/64, Rf/100 and Rf/128
• Coding: Manchester, Bi-phase, direct, PSK, FSK, (see e5551 datasheet)
• ID-code length: Block 0, Block 1, Block 1 to 2, Block 1 to 3, Block 1 to 7
• Signature: Header, sequence terminator, block terminator, and block and sequence
• Password: Activates password mode
• Lock Block 0: Setting this bit locks the configuration block of the transponder. That means bit
• Stop-mode enable: obey stop command
• Answer-On-Request: Activates anticollision mode (ticking shows an additional button for
terminator
rate, coding, etc. are fixed and cannot be changed anymore. Please use this feature with care
AOR wake-up)
The U2270B is not able to read all displayed bit rates and coding types. If invalid settings are
selected, a warning message will be displayed. For details, please refer to the e5551 datasheet.
TK5551 Read Tab
TMEB8704 Application Note
15