TMEB8704 Atmel, TMEB8704 Datasheet - Page 2

• Manufacturer Part Number: TMEB8704
• Description: KIT DEMO FOR RFID TRANSPONDERS
• Manufacturer: Atmel
• Type: Development kitr

Specifications of TMEB8704

• Contents: Board, Cables, Manual and more
• For Use With/related Products: e5530, T5552, T5557, TK5530, TK5551, TK5552, U2270B
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.3
2
Hardware Settings and Connector Positions
TMEB8704 Application Note
Before getting started, check the following:
When all 3 conditions are met, set the power switch to ON.
In RFID applications, the main board with the microcontroller is operated in a fixed configuration;
no settings are necessary. Check jumper J3 on the antenna interface to verify that it is has the
default setting (see
Figure 2-1.
• The antenna must be plugged into the socket of the interface board
• The RS232 connector on the interface board must be connected to either COM1 or COM2 of
• A supply line from the power source to the jack connector must be available
the PC
Main Board
RS 232 Connector
Reset Button
Figure 2-1
and
Figure 2-2 on page
3).
Jack Connector
Power Supply
Power Switch
4781A–RFID–10/05