M22-00 Omron, M22-00 Datasheet - Page 106

• Manufacturer Part Number: M22-00
• Description: SOCKET UNIT W/OUT VOLT REDUCTION
• Manufacturer: Omron

Specifications of M22-00

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: M2200

Specifications
Note: cUL: CSA, C22.2 No. 14
UL, cUL (File No. E41515)
5 A at 125 VAC, 3 A at 250 VAC (general use)
3 A at 30 VDC (resistive)
EN60947-5-1 (Low Voltage Directive)
3 A at 250 VAC (AC12), 3 A at 30 VDC (DC12)
Contacts
Screw-less Clamp
104
UL, cUL (See note.)
---
3 A at 250 VAC
5 A at 125 VAC
Allowable operating
frequency
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Durability
Ambient temperature
Ambient humidity
Electric shock protection class
PTI (tracking characteristic)
Degree of contamination
Weight
Recommended wire size
Usable wires and ten-
sile strength
Length of exposed wire
Approved Standards
Approved Standard Ratings
Ratings
Characteristics
Agency
AC resistive load
Item
Item
UL508
EN60947-5-1
Twisted wire
Solid wire
Tensile strength
Mechanical
Electrical
Malfunction
Destruction
Malfunction
Mechanical
Electrical
Standards
3 A at 30 VDC
DC resistive load
20 operations/minute max.
10 operations/minute max.
100 M
1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity
2,000 VAC, 50/60 Hz for 1 min between terminals of different polarity and also between each terminal
and ground
10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)
500 m/s
150 m/s
250,000 operations min. (durability of key: 10,000 operations min.)
100,000 operations min.
Operating: 10 C to 55 C (with no icing or condensation)
Storage:
Operating: 35% to 85%
Class II
175
3 (IEC947-5-1)
Approx. 26.5 g (in the case of a DPDT switch key)
E41515
---
0.5 mm
0.3mm
0.5 mm dia.
10 N
10 1 mm
2
2
min. (at 500 VDC)
max. (malfunction within 1 ms)
File No.
2
25 C to 65 C (with no icing or condensation)
2
twisted wire or 0.8 mm-dia. solid wire
0.5 mm
0.8 mm dia.
20 N
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following
conditions.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20 2 C
4. Operating frequency: 20 times/min
Key-type Selector Switch
2
Screw-less Clamp
0.75 mm
1.0 mm dia.
30 N
2
1.25 mm
---
40 N
2