M22-00 Omron, M22-00 Datasheet - Page 137

• Manufacturer Part Number: M22-00
• Description: SOCKET UNIT W/OUT VOLT REDUCTION
• Manufacturer: Omron

Specifications of M22-00

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: M2200

M2BJ-B
Precautions
Application Precautions
When power is supplied, there is an inrush current of up to 1 A. Con-
firm that this will not adversely affect operation or damage any
devices before using the M2BJ in application. There is no inrush
current with DC-only models (M2BJ-jjj-D).
Wiring
Perform soldering promptly and correctly at 30 W within 5 seconds
or at a temperature of 240°C within 3 seconds. Wait for one minute
after soldering before exerting any external force on the solder.
If flux is required, use non-corrosive rosin liquid. Ensure that the flux
does not penetrate the inside of the case.
In order to improve the reliability of the soldering and to prevent pat-
tern burnout, loop the wire through the terminal hole before solder-
ing.
In order to fit the terminal holes, use lead wires with a nominal cross-
sectional area of 0.25 mm
Operating Environment
Do not use the Buzzer in environments where foreign substances
may enter the sound outlet. Otherwise, the Buzzer may not sound.
Short-circuiting Jumper (M2BJ-BTH)
The Buzzer sounds continuously or intermittently depending on
how the short-circuiting bracket is attached to the case guide. When
the bracket is attached with the triangle on it facing direction A (PC
board side), the Buzzer sounds intermittently.
Cat. No. A046-E1-04
Correct Use
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Direction A
2
max.
Case guide
Bracket
Direction B
To produce continuous sounds, attach the bracket to the case guide
so that the triangle on the bracket faces direction B.
Volume Adjustment Mechanism (M2BJ-BH Only)
Adjust the volume by turning the control knob on the face of the
Buzzer using a screwdriver. Turn to the right to increase the volume
and turn to the left to decrease the volume.
Turn the control knob with a torque of 0.98 to 2.94 mN⋅m.
LED
Case guide
PC board
Bracket
Control knob
M2BJ-B
135