M22-00 Omron, M22-00 Datasheet - Page 47

• Manufacturer Part Number: M22-00
• Description: SOCKET UNIT W/OUT VOLT REDUCTION
• Manufacturer: Omron

Specifications of M22-00

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: M2200

A3C
Mounting the Insulation Cover
After securing the Switch to the panel using the mounting nut, pass
the lead wires through the holes in the Insulation Cover and then
perform wiring. Hold the Insulation Cover so that the cylindrical hole
is facing the Switch, and insert the lead wires from the end with the
barriers.
After wiring is completed, mount the Insulation Cover by pushing it
into the Switch.
Mounting the Dust Cover
Mounting the Switch Guard
1. The Dust Cover separates into 2 parts: the cap and the
2. Insert the Switch into the mounting frame. (Align the lock
3. Insert the Switch in the state described in step 2 into the
4. Mount the mounting nut from the back of the panel and tighten
5. Insert the cap into the mounting frame. Ensure that the entire
1. Insert the Switch into the Switch Guard.
2. Insert the Switch into the panel in the state described in step
3. Mount the mounting nut from the back of the panel and tighten
mounting frame.
projection with the recess on the mounting frame.)
panel. (Align the lock protrusion on the mounting frame with
the hole in the panel.)
it.
perimeter of the cap is properly inserted into the mounting
frame by pressing down on the cap from different directions.
1.
it.
Cap (transparent)
Insulation Cover attached to Switch
Switch Lock protrusions
Guard (transparent)
Holder (black)
Mounting frame
Switch terminal
Mounting nut
Panel
Panel
Mounting nut
A3C
45