NUC120RD1BN Nuvoton Technology Corporation of America, NUC120RD1BN Datasheet - Page 503

• Manufacturer Part Number: NUC120RD1BN
• Description: IC MCU 32BIT 64KB FLASH 64LQFP
• Manufacturer: Nuvoton Technology Corporation of America
• Series: NuMicro™r

Specifications of NUC120RD1BN

• Core Processor: ARM Cortex-M0
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: EBI/EMI, I²C, IrDA, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, LVD, POR, PS2, PWM, WDT
• Number Of I /o: 45
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

[5:3]
[2]
[1]
[0]
NuMicro™ NUC100 Series Technical Reference Manual
CMPCH
CMPCOND
CMPIE
CMPEN
Compare Channel Selection
000 = Channel 0 conversion result is selected to be compared
001 = Channel 1 conversion result is selected to be compared
010 = Channel 2 conversion result is selected to be compared
011 = Channel 3 conversion result is selected to be compared
100 = Channel 4 conversion result is selected to be compared
101 = Channel 5 conversion result is selected to be compared
110 = Channel 6 conversion result is selected to be compared
111 = Channel 7 conversion result is selected to be compared
Compare Condition
1 = Set the compare condition as that when a 12-bit A/D conversion result is greater or
0 = Set the compare condition as that when a 12-bit A/D conversion result is less than
Note: When the internal counter reaches the value to (CMPMATCNT +1), the CMPFx
bit will be set.
Compare Interrupt Enable
1 = Enable compare function interrupt
0 = Disable compare function interrupt
If the compare function is enabled and the compare condition matches the setting of
CMPCOND and CMPMATCNT, CMPF bit will be asserted, in the meanwhile, if CMPIE
is set to 1, a compare interrupt request is generated.
Compare Enable
1 = Enable compare
0 = Disable compare
Set this bit to 1 to enable ADC controller to compare CMPD[11:0] with specified
channel conversion result when converted data is loaded into ADDR register.
equal to the 12-bit CMPD (ADCMPRx[27:16]), the internal match counter will
increase one.
the 12-bit CMPD (ADCMPRx[27:16]), the internal match counter will increase one.
- 503 -
Publication Release Date: Oct 22, 2010
Revision V1.06