WM8776SEFT/V Wolfson Microelectronics, WM8776SEFT/V Datasheet - Page 14

• Manufacturer Part Number: WM8776SEFT/V
• Description: Audio CODECs Stereo CODEC with 5-Ch Mux
• Manufacturer: Wolfson Microelectronics

Specifications of WM8776SEFT/V

• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: TQFP-48
• Minimum Operating Temperature: - 25 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

WM8776
INTERNAL POWER ON RESET CIRCUIT
Figure 9 Typical Power up Sequence where DVDD is Powered before AVDD
w
Figure 8 Internal Power on Reset Circuit Schematic
The WM8776 includes an internal Power on Reset Circuit which is used reset the digital logic into a
default state after power up.
Figure 8 shows a schematic of the internal POR circuit. The POR circuit is powered from AVDD. The
circuit monitors DVDD and VMID and asserts PORB low if DVDD or VMID are below the minimum
threshold Vpor_off.
On power up, the POR circuit requires AVDD to be present to operate. PORB is asserted low until
AVDD and DVDD and VMID are established. When AVDD, DVDD, and VMID have been
established, PORB is released high, all registers are in their default state and writes to the digital
interface may take place.
On power down, PORB is asserted low whenever DVDD or VMID drop below the minimum threshold
Vpor_off.
If AVDD is removed at any time, the internal Power on Reset circuit is powered down and PORB will
follow AVDD.
In most applications the time required for the device to release PORB high will be determined by the
charge time of the VMID node.
PD, Rev 4.1, September 2008
Production Data
14