S29JL064H90TFI000 Spansion Inc., S29JL064H90TFI000 Datasheet - Page 24

• Manufacturer Part Number: S29JL064H90TFI000
• Description: Flash 3V 64Mb Float Gate standard config 90s
• Manufacturer: Spansion Inc.

Specifications of S29JL064H90TFI000

• Memory Type: NOR
• Memory Size: 64 Mbit
• Access Time: 90 ns
• Data Bus Width: 8 bit, 16 bit
• Architecture: Boot Sector
• Interface Type: Conventional
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Maximum Operating Current: 10 mA
• Mounting Style: SMD/SMT
• Operating Temperature: + 85 C
• Package / Case: TSOP-48
• Ic Interface Type: Parallel
• Supply Voltage Range: 2.7V To 3.6V
• Memory Case Style: TSOP
• No. Of Pins: 48
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

8.12
24
Temporary Sector Unprotect
(Note: For the following discussion, the term sector applies to both sectors and sector blocks. A sector block
consists of two or more adjacent sectors that are protected or unprotected at the same time (see
on page
This feature allows temporary unprotection of previously protected sectors to change data in-system. The
Temporary Sector Unprotect mode is activated by setting the RESET# pin to V
protected sectors can be programmed or erased by selecting the sector addresses. Once V
from the RESET# pin, all the previously protected sectors are protected again.
algorithm, and
V
Notes
1. All protected sectors unprotected (If WP#/ACC = V
2. All previously protected sectors are protected once again.
IL
, sectors 0, 1, 140, and 141 will remain protected during the Temporary sector Unprotect mode.
22).
Figure 17.12 on page 53
Figure 8.1 Temporary Sector Unprotect Operation
S29JL064H
shows the timing diagrams, for this feature. If the WP#/ACC pin is at
Unprotect Completed
IL
Program Operations
, sectors 0, 1, 140, and 141 will remain protected).
Temporary Sector
Perform Erase or
RESET# = V
D a t a
RESET# = V
(Note 1)
(Note 2)
START
S h e e t
ID
IH
S29JL064H_00_A8 September 8, 2009
ID
Figure 8.1
. During this mode, formerly
shows the
ID
is removed
Table 8.6