S29GL064N90TFI040 Spansion Inc., S29GL064N90TFI040 Datasheet - Page 61

• Manufacturer Part Number: S29GL064N90TFI040
• Description: Flash 3V 64Mb Float Gate highest address 90s
• Manufacturer: Spansion Inc.

Specifications of S29GL064N90TFI040

• Memory Type: NOR
• Memory Size: 64 Mbit
• Access Time: 90 ns
• Data Bus Width: 8 bit, 16 bit
• Architecture: Uniform / Boot Sector
• Interface Type: Page-mode
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Maximum Operating Current: 50 mA
• Mounting Style: SMD/SMT
• Operating Temperature: + 85 C
• Package / Case: TSOP-48
• Ic Interface Type: CFI, Parallel
• Supply Voltage Range: 2.7V To 3.6V
• Memory Case Style: TSOP
• No. Of Pins: 48
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

11. Absolute Maximum Ratings
12. Operating Ranges
October 29, 2008 S29GL-N_01_12
Notes
1. Minimum DC voltage on input or I/Os is –0.5 V. During voltage transitions, inputs or I/Os may overshoot V
2. Minimum DC input voltage on pins A9, ACC, and RESET# is –0.5 V. During voltage transitions, A9, ACC, and RESET# may overshoot
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
4. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only;
Notes
1. Operating ranges define those limits between which the functionality of the device is guaranteed.
2. V
Storage Temperature, Plastic Packages
Ambient Temperature with Power Applied
Voltage with Respect to Ground
Output Short Circuit Current
Ambient Temperature (T
Supply Voltages
20 ns. See
to V
V
overshoot to +14.0 V for periods up to 20 ns.
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is not
implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
SS
IO
CC
input voltage always must be lower than V
to –2.0 V for periods of up to 20 ns. See
+ 2.0 V for periods up to 20 ns. See
Figure
11.1. Maximum DC voltage on input or I/Os is V
A
), Industrial (I) Devices
D a t a
+2.0 V
+0.5 V
Figure 11.1 Maximum Negative Overshoot Waveform
+0.8 V
–0.5 V
–2.0 V
Figure 11.2 Maximum Positive Overshoot Waveform
2.0 V
V
V
V
V
S29GL-N MirrorBit
CC
IO
CC
CC
for full voltage range
Parameter
S h e e t
Figure
Figure
Parameter
CC
input voltage.
11.2.
11.1. Maximum DC input voltage on pin A9, ACC, and RESET# is +12.5 V which may
V
A9, ACC and RESET#
All other pins
(Note 3)
20 ns
20 ns
CC
®
Flash Family
(Note 1)
CC
+ 0.5 V. During voltage transitions, input or I/O pins may overshoot
(Note 1)
20 ns
20 ns
(Note 2)
20 ns
20 ns
SS
–65°C to +150°C
–65°C to +125°C
–0.5 V to +4.0 V
–0.5 V to +12.5 V
–0.5 V to V
200 mA
to –2.0 V for periods of up to
+2.7 V to +3.6 V
–40°C to +85°C
+1.65 to +3.6 V
Range
Rating
CC
+0.5 V
61