PKG.M0.8SL.VJ LEMO, PKG.M0.8SL.VJ Datasheet - Page 30

• Manufacturer Part Number: PKG.M0.8SL.VJ
• Description: Circular Push Pull Connectors 8P FML RECP R/A PCB GRAY FRONT NUT
• Manufacturer: LEMO
• Series: 1P Seriesr

Specifications of PKG.M0.8SL.VJ

• Product Type: Connectors
• Contact Style: Socket (Female)
• Shell Style: Receptacle
• Number Of Contacts: 8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Stamped contacts (For PJ )
28
L
Solder
T
1
2
6. Slide backshell ➀ forward and align the tabs to the slots on
7. If the need arises to remove an installed contact, during the
1. Strip the cable according to the lengths given in the
2. Slide the backshell ➀ onto the cable
3. Contact removal
4. Solder conductors into contacts ➁, making sure that neither
5. Arrange the contact-conductor combinations according to
The only recommended chemical cleaner is Isopropyl Alcohol.
Manual removal
Gently remove each of the individual contacts ➁ by breaking
the plug ➂. Snap backshell onto the plug to complete the
assembly. Various strain relief techniques can be
incorporated, depending on application.
assembly process or subsequent repair, individual contacts
can be removed using LEMO extraction tool (part number:
DCF.91.050.2LT). DO NOT reuse extracted contacts.
drawing. Tin the conductors.
Automated removal: if using automated equipment to
remove the contacts ➁, cut as near to the curled portion of
the contact to minimize the size of the remaining attachment
tab.
in both directions as shown. If any portion of the attachment
tab remains on the contact ➁ , clip off to minimize risk of
shorting.
solder nor flux gets onto the cable insulation.
the marking on the plug ➂ and locate them into the plug by
gently pushing the contact-conductor into the proper hole
until fully seated. Check that all contacts ➁ are correctly
located and remain in position when given a gentle pull.
3
M0.9, M1.0, M1.4
Configuration
15.0
Dimensions (mm)
L
3.0
T