PKG.M0.8SL.VJ LEMO, PKG.M0.8SL.VJ Datasheet - Page 68

• Manufacturer Part Number: PKG.M0.8SL.VJ
• Description: Circular Push Pull Connectors 8P FML RECP R/A PCB GRAY FRONT NUT
• Manufacturer: LEMO
• Series: 1P Seriesr

Specifications of PKG.M0.8SL.VJ

• Product Type: Connectors
• Contact Style: Socket (Female)
• Shell Style: Receptacle
• Number Of Contacts: 8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

66
Solder LV contacts
Assembly instructions
1
2
Solder
L
T
3
Solder
4
5
For PSU only:
We recommend ONLY the use of VTCS-6 Clear Vibra-tite or
ThreeBond 1401 to secure the connector backnut. The use of
other materials could result in damage to the connector.
The only recommended chemical cleaner is Isopropyl Alcohol.
1.Strip the cable according to the lengths given in the table.
2.Slide the retaining nut ➀, the washer ➁, the seal ➂ and the
3.In case of a screened cable introduce the earthing
4.Slide the clamping sleeve ➃ forward and locate tag ➄
5.Push the whole assembly into the shell ➈ whilst turning it
6
Tin the conductors. In case of a screened cable separate
the braid and twist it apart as shown.
clamping sleeve ➃. In case of a screened cable solder the
braid into the earthing contact ➅.
contact ➅ into the insert ➇. Check that contact is
correctly located and remains in position when given a
gentle pull.
Solder conductors into contacts, making sure that
neither solder nor flux gets onto the insulator or cable
insulation.
into one of the insulator slot according to the selected
polarization code. Make sure that same code is used for
plug and socket.
Tight the screw of the clamping sleeve ➃ to secure the
cable. Slide washer and seal against clamping sleeve.
to insure that the tag ➄ is correctly located in the inside
slot of the shell. Tighten the retaining nut ➀ to the
maximum torque of 1.2 Nm.
– Socket mounting nut or screws = 2.3 Nm.
Configuration
306 - 310
314 - 318
8
13.0
13.0
Dimensions (mm)
L
9
3.0
3.0
T