GCM188R71H103KA37D Murata, GCM188R71H103KA37D Datasheet - Page 32

• Manufacturer Part Number: GCM188R71H103KA37D
• Description: Multilayer Ceramic Capacitors (MLCC) - SMD/SMT 0603 0.01uF 50volts X7R 10%
• Manufacturer: Murata
• Series: GCMr

Specifications of GCM188R71H103KA37D

• Voltage Rating: 50 Volts
• Operating Temperature Range: - 55 C to + 125 C
• Temperature Coefficient / Code: X7R
• Product: Automotive MLCCs
• Dimensions: 0.8 mm W x 1.6 mm L x 0.8 mm H
• Termination Style: SMD/SMT
• Capacitance: 0.01 uF
• Tolerance: 10 %
• Package / Case: 0603 (1608 metric)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2
!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
30
No.
Specifications and Test Methods
1
2
3
4
5
6
7
8
9
Pre-and Post-Stress
Electrical Test
High Temperature
Exposure (Storage)
Temperature
Cycle
Destructive
Physical Analysis
Moisture
Resistance
Biased Humidity
Operational Life
External Visual
Physical Dimension
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
AEC-Q200
Test Item
Appearance
Capacitance
Change
Q
I.R.
Appearance
Capacitance
Change
Q
I.R.
Appearance
Capacitance
Change
Q
I.R.
Appearance
Capacitance
Change
Q
I.R.
Appearance
Capacitance
Change
Q
I.R.
The measured and observed characteristics should satisfy the
specifications in the following table.
No marking defects
Within ±2.5% or ±0.25pF
(Whichever is larger)
QU1000
More than 10,000MΩ or 500MΩ · µF
(Whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
No marking defects
Within ±2.5% or ±0.25pF
(Whichever is larger)
QU1000
More than 10,000MΩ or 500MΩ · µF
(Whichever is smaller)
No defects or abnormalities
The measured and observed characteristics should satisfy the
specifications in the following table.
No marking defects
Within ±3.0% or ±0.3pF
(Whichever is larger)
QU350
More than 10,000MΩ or 500MΩ · µF
(Whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
No marking defects
Within ±3.0% or ±0.3pF
(Whichever is larger)
QU200
More than 1,000MΩ or 50MΩ · µF
(Whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
No marking defects
Within ±3.0% or ±0.3pF
(Whichever is larger)
QU350
More than 1,000MΩ or 50MΩ · µF
(Whichever is smaller)
No defects or abnormalities
Within the specified dimensions
Specifications
–
Sit the capacitor for 1000±12 hours at 150±3°C. Let sit for 24±2
hours at room temperature, then measure.
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (19). Perform the 1000 cycles
according to the 4 heat treatments listed in the following table.
Let sit for 24±2 hours at room temperature, then measure.
Per EIA-469
Apply the 24 hour heat (25 to 65°C) and humidity (80 to 98%)
treatment shown below, 10 consecutive times.
Let sit for 24±2 hours at room temperature, then measure.
Apply the rated voltage and DC1.3+0.2/-0V (add 6.8kΩ
resistor) at 85±3°C and 80 to 85% humidity for 1000±12 hours.
Remove and let sit for 24±2 hours at room temperature, then
measure.
The charge/discharge current is less than 50mA.
Apply 120% of the rated voltage for 1000±12 hours at
125±3°C. Let sit for 24±2 hours at room temperature, then
measure.
The charge/discharge current is less than 50mA.
Visual inspection
Using calipers
Time (min.)
Temp. (°C)
Step
-10
70
65
60
55
50
45
40
35
30
25
20
15
10
-5
C
5
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Initial measurement
-55+0/-3
15 ± 3
1
AEC-Q200 Test Method
Humidity
90-98%
Room Temp.
+10
-2
One cycle 24 hours
Humidity
80-98%
C
2
1
Continued on the following page.
Humidity
90-98%
Hours
125+3/-0
15 ± 3
Humidity
3
80-98%
Room Temp.
Humidity
90-98%
4
1
C03E.pdf
09.3.31