DP-101-E-P SUNX, DP-101-E-P Datasheet - Page 8

• Manufacturer Part Number: DP-101-E-P
• Description: PRESSURE SENSOR, -1TO1BAR, PNP, 2M
• Manufacturer: SUNX

Specifications of DP-101-E-P

• Svhc: No SVHC (18-Jun-2010)
• Response Time: 2.5ms
• Contact Configuration: Connecting Cable, 2m
• External Depth: 42.5mm
• External Length / Height: 30mm
• External Width: 30mm
• Ip/nema Rating: IP40
• Lead: RoHS Compliant

7
Sub display can be customized
The sub display can be set to indicate any other desired values or
letters apart from the threshold value. This eliminates the need for
tasks such as affixing a label to the device to indicate the normal
pressure value.
Peak hold and Bottom hold functions
The peak values and bottom values for fluctuating pressures can be
displayed using the dual display.
Response time can be changed
The response time can be changed in 10 levels from 2.5 ms to
5,000 ms. This prevents chattering and incorrect operation due to
sudden changes in pressure.
Other useful functions
<
Indicates desired values and letters
Unit display
Threshold value
Output
Pressure
>
OFF
ON
<
Blinks alternately
Number display
Temporary change due to fluctuation
Incorrect operation prevented
>
<
Desired letter display
>
Setting details can be understood at a glance
The DP-100 setting details appear in the digital display. Because the
settings are in numeric form that can be easily understood, it is
useful for times such as when receiving technical support by
telephone.
Energy-saving design! Equipped with an ECO mode
This mode lowers the display luminance to cut power consumption
by approximately 30 %. The displays can also be turned off
completely to achieve a power saving of approximately 40 %.
Display refresh rate can be varied
The display refresh rate for the digital displays can be changed to
one of three settings: 250 ms, 500 ms or 1,000 ms. Flickering of the
display can be reduced by making the display refresh rate longer.
Current consumption for
24 V power supply:
1st digit: Setting status for
2nd digit: Setting status for
5th digit: Response time
6th digit: Display unit setting
Normal
What are the check
codes for the setting?
comparative output 1
35 mA or less
setting
comparative output 2
Current consumption for
24 V power supply:
ECO-STD
Power consumption
25 mA or less
30 % less
Approx.
The code on the main display is 3205.
The sub display reads 7011.
3rd digit: Threshold value setting
7th digit: Display refresh rate setting
Current consumption for
24 V power supply:
4th digit: Display color setting
8th digit: ECO mode setting
ECO-FULL
20 mA or less
Power consumption
40 % less
Approx.