CV500RT221 Omron, CV500RT221 Datasheet - Page 24

• Manufacturer Part Number: CV500RT221
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500RT221

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Connections
Remote I/O Slave Units
Disconnecting the Cable
Switch Settings and Adjustments
PC Switch Settings
Contrast
Buzzer
Replacing the Memory Cassette
1, 2, 3...
Squeeze the lock release levers on the sides of the connector and pull the con-
nector straight out to disconnect.
Set the DIP switch to a baud rate of 50 kbps. The DIP switch on the CPU Unit is
effective for both the peripheral device connector and the connector on the I/O
Interface Unit. The Remote I/O Slave Unit has its own DIP switch.
Turn the contrast adjustment clockwise or counterclockwise to adjust the con-
trast of the display.
Turn the volume adjustment clockwise or counterclockwise to adjust the volume
of the buzzer.
Use the following procedure to replace the Memory Cassette if you are going to
use the CVM1-MP201-V1 Memory Cassette.
1. Remove the screw holding the Memory Cassette from the back of the Pro-
gramming Console.
Lock release lever
Memory cassette
Section 2-2
13