PGMMOD00 Red Lion Controls, PGMMOD00 Datasheet - Page 3

• Manufacturer Part Number: PGMMOD00
• Description: Display Programming Module
• Manufacturer: Red Lion Controls

Specifications of PGMMOD00

• Accessory Type: Display Programming Module
• Module Type: Programming/Display
• For Use With: IAMS Universal Signal Conditioning Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7. STEP RESPONSE TIME: (0 to 90% or 100 to 10%)
8. ACCURACY: The greater of the general and basic values.
9. CALIBRATION TEMPERATURE: 20 to 28 ºC
10. RELAY OUTPUTS: Dual Form A. Contacts rated at 2 A AC or 1 A DC
A
RTD, Linear Resistance, Potentiometer Inputs
Temperature input: ≤ 1 sec
Current/Voltage input: ≤ 400 msec
Hysteresis: 0.1 to 25 % (1 to 2999 display counts)
On and off delay: 0 to 3600 sec
Sensor Error Detection: Break / Make / Hold
Max. Voltage: 250 Vrms
Max. Current: 2 A AC or 1 ADC
Max. Power: 500 VA
RTD Types: Pt10, Pt20, Pt50, Pt100, Pt200, Pt250, Pt300, Pt400, Pt500,
Cable Resistance per wire: RTD, 50
Sensor Current: RTD, Nom. 0.2 mA
Sensor Error Detection: RTD, yes
Short Circuit Detection: RTD, < 15
CCESSORY
TC Type: B, R, S,
E, J, K, L, N, T, U
Potentiometer
Pt1000, Ni50, Ni100, Ni120, and Ni1000
INPUT TYPE
Potentiometer
W3, W5, LR
Input Type
Input Type
TC Type:
Pt100
Ni100
Lin. R
Pt100
Lin. R
Volt
mA
All
MIN. VALUE
-200 °C
Display/ Programming Module
programming of the module. For applications that require more than one IAMS, the
same programming module can be used to program multiple units. In fact, it can store
the configuration from one module and download the same configuration to another
module. When the module is not being used for progamming, it can provide a display of
the process data and status.
Display: LCD display with 4 lines; line 1 is 0.2" (5.5 mm) and displays the input signal,
Programming Mode: Three push buttons combined with a simple and easily
Password Protection: Programming access may be blocked by assigning a password.
-60 °C
10 Ω
0 Ω
Absolute Accuracy
The module easily connects to the front of the IAMS and is used to enter or adjust the
line 2 is 0.13" (3.33 mm) and displays units, line 3 is 0.13" (3.33 mm) and displays
analog output or tag number, line 4 shows communication and relay status
understandable menu structure and help text guides you effortlessly through the
configuration steps. The actual configuration/set-up will be explained in the
Programming Section.
The password is saved in the IAMS to guard against unautherized modifications to the
configuration. A default password of “2008” allows access to all configuration menus.
GENERAL VALUES
≤ ±0.1% of span
Basic Accuracy
BASIC VALUES
≤ ±0.2 °C
≤ ±20 µV
≤ ±0.1
≤ ±0.1
≤ ±4 µA
≤ ±1 °C
≤ ±2 °C
Ω
Ω
Ω
Ω
max.
MAX. VALUE
10000 Ω
+850 °C
+250 °C
100 kΩ
Temperature Coefficient
Temperature Coefficient
≤ ±0.1% of span/°C
≤ ±0.01 °C/°C
≤ ±0.01
≤ ±0.01
≤ ±0.4 µA/°C
≤ ±0.5 °C/°C
≤ ±0.2 °C/°C
≤ ±2 µV/°C
STANDARD
DIN 43760
IEC60751
Ω
Ω
-
-
/°C
/°C
3
11. ANALOG OUTPUT:
12. ENVIRONMENTAL CONDITIONS:
13. CERTIFICATIONS AND COMPLIANCES:
14. CONSTRUCTION: IP 50/IP20 Touch Safe, case body is black high impact
15. CONNECTIONS: High compression cage-clamp terminal block. Use
16. WEIGHT: 5 oz (145 g)
Current Output:
Voltage Output:
Operating Temperature: -20 to +60 ºC
Operating and Storage Humidity: 95% relative humidity (non-condensing)
ELECTROMAGNETIC COMPATIBILITY:
SAFETY
Refer to the EMC Installation Guidelines section of this bulletin for
plastic. Pollution Degree 1.
60/75°C copper conductors only.
Wire strip length: 0.3" (7.5 mm)
Wire gage: 26 – 14 AWG stranded wire
Torque: 4.5 inch-lbs (0.5 N-m) max
Signal Range (Span): 0 to 20 mA
Programmable Measurement Range: 0 to 20, 4 to 20, 20 to 0, and 20 to 4
Load Resistance: 800 Ω max.
Output Compliance: 16 VDC max.
Load Stability: = 0.01 % of span, 100 Ω load
Sensor Error Detection: 0 / 3.5 mA/ 23 mA / none
Output Limitation: For 4 to 20 and 20 to 4 mA signals - 3.8 to 20.5 mA
Signal Range: 0 to 10 VDC
Programmable Signal Ranges: 0 to 1, 0.2 to 1, 0 to 10, 0 to 5, 1 to 5, 2 to
Load: 500 K Ω min
EMC 2004/108/EC Emission and Immunity EN 61326
EMC Immunity Influence
Extended EMC Immunity: NAMUR NE 21,
LVD 2006/95/EC
Factory Mutual Approved, Report #3034432, FM 3600, 3611, 3810, and
FM, applicable in: Class I, Div. 2, Group A, B, C, D
Max. ambient temperature for T5
UL Listed, File # E324843, UL508, CSA C22.2 No. 14-M95
additional information.
mA
Current Limit: = 28 mA
10, 1 to 0, 1 to 0.2, 5 to 0, 5 to 1, 10 to 0, and 10 to 2 V
A criterion, burst
ISA 82.02.01
LISTED by Und. Lab. Inc. to U.S. and Canadian safety standards
5.6 oz (160 g) with programming module
For 0 to 20 and 20 to 0 mA signals - 0 to 20.5 mA
Class I, Div. 2, Group IIC
Zone 2
60°C
<± 0.5% of span
<± 1% of span
EN 61010-1