7010 04 19 LEGRIS, 7010 04 19 Datasheet - Page 11

• Manufacturer Part Number: 7010 04 19
• Description: FLOW CONTROL REGULATOR, BANJO, 4MM
• Manufacturer: LEGRIS

Specifications of 7010 04 19

• Operating Pressure Psi Max: 145psi
• Operating Temperature Range: 0°C To +70°C
• Connection Size: 4mm
• Operating Temperature Max: 70°C
• Operating Temperature Min: 0°C
• Svhc: No SVHC (15-Dec-2010)
• Operating Pressure Max: 145psi
• Rohs Compliant: NA
• Valve Type: Flow Regulator
• Lead Free Status / RoHS Status: na

flow control regulators
Legris flow control regulators control the speed of a pneumatic
cylinder. In the one-way version, the exhaust or inlet air flow is
controlled by an adjustable restrictor. The inlet or exhaust flow
is unrestricted full bore. In a bi-directional version, they control
air supply in both exhaust and supply flow. Depending upon the
model, Legris flow regulators may be fitted on the cylinder or in
the compressed air line. However, flow regulation (and therefore
cylinder control speed) is more precise and constant when
positioned near the cylinder : in this way, it is possible to avoid
mini-ball valves - 2/2 and 3/2 versions
Legris mini-ball valves enable the opening and closing of a
pneumatic circuit.
Compact and light weight, they are suited to all types of
installation. Moreover, thanks to the 3 types of mounting
available, these models are suited to all applications.
Their screwdriver slot allows closing and opening, even
where access may be difficult.
Full passage, Legris mini-ball valves offer excellent
performance of flow.
snap connectors
Legris snap connector fittings are used to isolate a circuit
without venting the whole installation. They are designed to
facilitate frequent connections/disconnections –in complete
safety. Connection is confirmed by an audible « click ».
non-return
valve
"exhaust" version
valve
adjustment screw
locknut
body
A
probe
principle of operation
non-return
valve
3/2 models with vent
"supply" version
the elastic effect of the compressed air contained in the pipework
between the control valve and cylinder.
Direct mounting of the banjo flow regulator fitting onto the
cylinder is therefore the optimum solution.
specifications :
suitable fluids : compressed air
working pressure : 1 to 10 bar
working temperature : 0° to + 70°
technical specifications:
suitable fluid: compressed air
maximum pressure: 10 bar
vacuum capability: vacuum of 755 mm Hg (99% of vacuum)
working temperature: - 20° to + 80°C
technical specifications:
fluid : compressed air
working temperature: - 20° to + 80°C
maximum pressure: 10 bar
adjustment screw
locknut
screwdriver slot
handle with
B
downstream vent
bi-directional version
disconnection
collett
locknut
fine adjustment screw
C
1
2
3