7010 04 19 LEGRIS, 7010 04 19 Datasheet - Page 8

• Manufacturer Part Number: 7010 04 19
• Description: FLOW CONTROL REGULATOR, BANJO, 4MM
• Manufacturer: LEGRIS

Specifications of 7010 04 19

• Operating Pressure Psi Max: 145psi
• Operating Temperature Range: 0°C To +70°C
• Connection Size: 4mm
• Operating Temperature Max: 70°C
• Operating Temperature Min: 0°C
• Svhc: No SVHC (15-Dec-2010)
• Operating Pressure Max: 145psi
• Rohs Compliant: NA
• Valve Type: Flow Regulator
• Lead Free Status / RoHS Status: na

blocking fittings
Designed to offer maximum flow capacity Legris blocking
fittings lock the piston by simultaneously cutting off
the supply and exhaust air.
Functional locks are more precise and rapid when blocking
fittings are located on the cylinder : the volume of air in the
pipework no longer needs to be taken into consideration.
installation :
Mounted in pairs, blocking fittings are installed directly on
the cylinder. As they can be fully swivelled, their use
provides excellent flexibility in the design and installation
of pneumatic circuits.
manually operated and sleeve valves
3/2 and 2/2 manual sw i tch operated vent fittings
Manual switch operated vent fittings can be used whenever
the system has to be frequently vented. They guarantee
immediate isolation of the air line by venting to atmosphere
by a simple manual operation of the lever.
Supply is provided (3/2 version):
- on the instant connection side (7800-7805)
- on the threaded side; when mounted on a manifold
specifications :
suitable fluid : compressed air
maximum working pressure : 10 bar
working temperature : - 10° to + 80°C
(e.g. Legris aluminium manifolds). (7801-7806)
pressure
system
supply
“supply” version
“control” version
moving cylinder (active pilot signal)
orientable
lever
spring
piston
lock nut
lock nut
signal authorising
supply
movement
OPEN
OPEN
system
exhaust
supply
cylinder
pressure
system
supply
CLOSED
CLOSED
diaphragm
pilot
signal
system vented
to atmosphere
system vented
to atmosphere
to control valve
supply
system
1
2
3
specifications :
suitable fluid : compressed air
working pressure : 1 to 10 bar
working temperature : - 20° to + 70°C
3/2 pneumatic sleeve valves
Pneumatic sleeve valves may be used to effect isolation
of the air line by venting the system to atmosphere.
Their in-line configuration allows compact mounting
directly into the pipework.
specifications :
suitable fluid : compressed air
maximum working pressure : 16 bar
working temperature : - 10° to + 80°C
direction of flow: one-way
valve closed = supply shut-off, system vented to atmosphere
blocked cylinder (pilot signal removed)
supply
supply
spring
piston
valve open = free flow of air to system
signal disappearance
creates block
exhaust
supply
diaphragm
"safety "
"safety "
to system
to system
3 1
1
2
12
2