7010 04 19 LEGRIS, 7010 04 19 Datasheet - Page 9

• Manufacturer Part Number: 7010 04 19
• Description: FLOW CONTROL REGULATOR, BANJO, 4MM
• Manufacturer: LEGRIS

Specifications of 7010 04 19

• Operating Pressure Psi Max: 145psi
• Operating Temperature Range: 0°C To +70°C
• Connection Size: 4mm
• Operating Temperature Max: 70°C
• Operating Temperature Min: 0°C
• Svhc: No SVHC (15-Dec-2010)
• Operating Pressure Max: 145psi
• Rohs Compliant: NA
• Valve Type: Flow Regulator
• Lead Free Status / RoHS Status: na

pressure regulator fittings
pressure reducer fittings
Legris pressure reducer fittings provide the cylinder with a
circuit pressure reduced to a value determined by manual
adjustment, thereby also increasing energy efficiency.
Theses fittings may be mounted :
- directly to a control valve or terminal block (banjo version),
- on the pipework between the control valve and cylinder
pneumatic soft start fittings
Pneumatic soft start fittings allow air pressure to gradually
increase on the first cycle only.
They prevent shocks to any pneumatic system : each cylinder
thus protected gradually returns to the position it stopped
at when the system was vented.
Mounted on the F.R.L. outlet, they protect the whole
downstream installation (types 7860-7861/7864/7865).
Mounted to the supply port of the control valve or the
adjustment
(in-line version).
calibrated
allen key)
(manual
or with
poppet
spring
screw
valve
adjustment by Allen Key
gold coloured identification
washer
pressure speed regulator
spring
adjustable needle
valve
FRL
supply
output
energy economy
indicator
non-return valve skirt
7860-7861
outlet pressure
selection
to system
the cylinder
FRL
to
output
yellow : maximum saving
red : moderate saving
orange : high saving
at a given value the pressure applied to pneumatic
equipment, whatever the fluctuations of pressure upstream.
The pressure outlet is fully controlled by an adjustment
screw : to assist pressure selection, the screw
is calibrated showing pressure setting levels.
Compact, flow pressure regulators may be mounted:
- downstream of the control valve, for reduced pressure in
- upstream of the control valve, for reduced pressure in
specifications :
suitable fluid : compressed air
working pressure : input pressure : 1 to 16 bar
regulated pressure : 1 to 8 bar
working temperature : - 10° to + 70°C
specifications :
suitable fluid : compressed air
working pressure : 1 to 8 bar
working temperature : - 15° to + 60°C
common supply line of several associated valves, they
control all designated cylinders (types 7870/7871/7874/7875).
specifications :
suitable fluid : compressed air
working pressure : 3 to 10 bar
working temperature : - 15° to + 60°C
Legris pressure regulator fittings are used to stabilize
one direction,
both directions.
control valve
control valve
reversal of
adjustment by Allen Key
black identification
washer
pressure speed
regulator
spring
adjustable needle
valve
reduced
system
P1
P1
"energy efficient"
"energy efficient"
pressure
start of cylinder
stroke
system pressure P2
saving
input
pressure P2
system
7870-7871
"safety"
end of cylinder
stroke
control valve
time
input