CS1W-CN313 Omron, CS1W-CN313 Datasheet - Page 13

• Manufacturer Part Number: CS1W-CN313
• Description: "CABLE CS1 EXP I/O,30cm"
• Manufacturer: Omron

Specifications of CS1W-CN313

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Safety Precautions
!WARNING
!WARNING
!Caution Execute online edit only after confirming that no adverse effects will be
!Caution Confirm safety at the destination node before transferring a program to
!Caution Tighten the screws on the terminal block of the AC Power Supply Unit to the
factor affecting the PC operation. Not doing so may result in serious acci-
dents.
Do not attempt to disassemble, repair, or modify any Units. Any attempt to do
so may result in malfunction, fire, or electric shock.
Do not touch the Power Supply Unit while power is being supplied or immedi-
ately after power has been turned OFF. Doing so may result in burns.
caused by extending the cycle time. Otherwise, the input signals may not be
readable.
another node or changing contents of the I/O memory area. Doing either of
these without confirming safety may result in injury.
torque specified in the operation manual. The loose screws may result in
burning or malfunction.
• Emergency stop circuits, interlock circuits, limit circuits, and similar safety
• The PC will turn OFF all outputs when its self-diagnosis function detects
• The PC outputs may remain ON or OFF due to deposition or burning of
• When the 24-VDC output (service power supply to the PC) is overloaded
measures must be provided in external control circuits.
any error or when a severe failure alarm (FALS) instruction is executed.
As a countermeasure for such errors, external safety measures must be
provided to ensure safety in the system.
the output relays or destruction of the output transistors. As a counter-
measure for such problems, external safety measures must be provided
to ensure safety in the system.
or short-circuited, the voltage may drop and result in the outputs being
turned OFF. As a countermeasure for such problems, external safety
measures must be provided to ensure safety in the system.
xiii
3