SNAP-PS5 OPTO 22, SNAP-PS5 Datasheet - Page 11

• Manufacturer Part Number: SNAP-PS5
• Description: POWER SUPPLY, SWITCH MODE, 5V
• Manufacturer: OPTO 22
• Type: Power Suppliesr

Specifications of SNAP-PS5

• Power Supply Type: Switching
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 5V
• Output Current: 4A
• Input Voltage: 95V AC To 130V AC
• Length: 102.86mm
• Width: 44.44mm
• Height: 106.69mm
• Configuration: Enclosed
• Current, Output: 4 A
• Dimensions: 4.05 in. L x 4.89 in. H x 1.75 in. W
• Frequency, Operating: 47 to 63 Hz
• Mounting Type: Panel
• Number Of Outputs: 1
• Operation: Linear
• Output: 5 VDC @ 4 A
• Primary Type: AC-DC
• Temperature, Operating: 0 to +70 °C
• Voltage, Input: 120 VAC
• Voltage, Output: 5 VDC
• Weight: 15 Oz.
• Lead Free Status / RoHS Status: na

SNAP Power Supplies
Power Requirements Tables
© 2006–2009 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
Opto 22 recommends using one power supply per I/O unit and one power supply per controller. See
Requirements” on page 2
To determine power requirements for products not listed in these tables, see the data sheets for the individual products.
Controller Power Requirements
I/O Processor (Brain or On-the-Rack Controller) Power Requirements
SNAP PAC S-series controllers (wired)
Wired+Wireless S-series PACs
SNAP-LCSX or -LCSX-PLUS controller
SNAP-LCM4 controller
* SNAP-PAC-S1 controllers with serial numbers below 500,000 use 8–24 VDC.
** Uses 1 A if powered at 10V. To determine amps required, divide 10 by the number of
volts applied. Example: 10 / 24 V = 0.417 A (24 VDC input requires 0.417 A)
SALES 800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] • SUPPORT 800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
SNAP PAC R-series controllers (all wired models)
SNAP PAC R-series controllers (Wired+Wireless)
SNAP PAC EB and SB brains (all wired models)
SNAP PAC EB brains (Wired+Wireless)
SNAP Ultimate controller/brains (all models)
SNAP Ethernet brains
SNAP Simple I/O brains
B3000 (serial SNAP brain)
SNAP-D64RS
SNAP-B3000-Modbus
SNAP ARCNET brains
SNAP-B4
SNAP-B6
*Current from 5-volt supply
Standalone Controller or adapter card
M4-SENET-100 adapter card
M4SARC adapter card
M4DUALARC adapter card
M4SARCF adapter card
M4SARCFR adapter card
Processor (Brain or Rack-mounted Controller)
for additional information.
Power Req (VDC)
8–32 VDC*
8–32 VDC
5 VDC
5 VDC
5 VDC
5 VDC
5 VDC
5 VDC
5 VDC
Power Req. (Amps)*
1.500 if terminated
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
Power Req. (Amps)
1.200
1.500
0.750
1.000
1.000
0.800
0.500
0.500
1.000
1.000
11.3 VA
10 VA**
0.500
1.000
1.000
0.200
0.150
0.250
0.350
“I/O Unit Power
PAGE
11