SNAP-PS5 OPTO 22, SNAP-PS5 Datasheet - Page 3

• Manufacturer Part Number: SNAP-PS5
• Description: POWER SUPPLY, SWITCH MODE, 5V
• Manufacturer: OPTO 22
• Type: Power Suppliesr

Specifications of SNAP-PS5

• Power Supply Type: Switching
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 5V
• Output Current: 4A
• Input Voltage: 95V AC To 130V AC
• Length: 102.86mm
• Width: 44.44mm
• Height: 106.69mm
• Configuration: Enclosed
• Current, Output: 4 A
• Dimensions: 4.05 in. L x 4.89 in. H x 1.75 in. W
• Frequency, Operating: 47 to 63 Hz
• Mounting Type: Panel
• Number Of Outputs: 1
• Operation: Linear
• Output: 5 VDC @ 4 A
• Primary Type: AC-DC
• Temperature, Operating: 0 to +70 °C
• Voltage, Input: 120 VAC
• Voltage, Output: 5 VDC
• Weight: 15 Oz.
• Lead Free Status / RoHS Status: na

SNAP Power Supplies
Installation
© 2006–2009 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
Panel Mounting (standard)
Mount the SNAP power supply in a location where the attached red
and black power wires will reach the “+” and “-” power terminals
on the SNAP mounting rack or controller. Do not extend the wires.
DIN-Rail Mounting (optional)
1. For DIN-rail mounting, remove the four screws that fasten the
2. Remove panel mounting base plate.
3. In place of the panel mounting base plate, use the four screws
4. Mount the SNAP power supply on the DIN rail (next to the
panel mounting base plate to the power supply. Keep screws
in a safe place.
removed in step 1 to fasten the DIN-rail adapter (purchased
separately) to the power supply.
power connector on the I/O unit).
SALES 800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] • SUPPORT 800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
3