AFBR-703SDDZ Avago Technologies US Inc., AFBR-703SDDZ Datasheet - Page 22

• Manufacturer Part Number: AFBR-703SDDZ
• Description: SFP+ 850nm 1/10GbE SR MMF,Gen2 STD
• Manufacturer: Avago Technologies US Inc.
• Series: -r

Specifications of AFBR-703SDDZ

• Data Rate: 10.312Gbd
• Wavelength: 850nm
• Applications: Ethernet
• Voltage - Supply: 3.135 V ~ 3.465 V
• Connector Type: LC Duplex
• Mounting Type: SFP+
• Optical Fiber Type: TX/RX
• Data Transfer Rate: 10313MBd
• Optical Rise Time: 0.028ns
• Optical Fall Time: 0.028ns
• Operating Temperature Classification: Commercial
• Peak Wavelength: 860nm
• Package Type: SFP
• Operating Supply Voltage (min): 3.135V
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.465V
• Output Current: 20mA
• Operating Temp Range: 0C to 70C
• Mounting: Snap Fit To Panel
• Pin Count: 20
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Appendix: Rate Select Control
RX and TX rates can be independently controlled by either hardware input pins or via register writes. Module electri-
cal input pins 7 and 9 are used to select RX and TX rate respectively. Status of each logic level is reflected to register
byte 110 bit 4 and 5 on address A2h as shown in the diagram below. RX and TX rates can also be controlled by register
writes to byte 110 bit 3 and 118 bit 3. Power on default of these bits are logic low. Hardware and software control
inputs are OR’d to allow flexible control.
RS0 RX Rate Select control flow
For product information and a complete list of distributors, please go to our website:
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved.
AV02-1967EN -
Hardware
RS0 (PIN7) Voltage
A2h, byte 110
"1"...V>2.0
"0"...V<0.8
Hardware
0
0
1
1
RS0 Control Input
Input
Bit 4
January 17, 2011
Software
0
1
0
1
RX Rate
Control
OR
A2h, byte 110
Software
Operation
Input
Bit 3
1.25G
10G
10G
10G
RX
www.avagotech.com
RS1 TX Rate Select control flow
Hardware
RS1 (PIN9) Voltage
A2h, byte 110
"1"...V>2.0
"0"...V<0.8
RS1 Control Input
Hardware
0
0
1
1
Input
Bit 5
Software
0
1
0
1
TX Rate
Control
A2h, byte 118
OR
Software
Operation
Input
1.25G
Bit 3
10G
10G
10G
TX