CRT1-TS04T Omron, CRT1-TS04T Datasheet - Page 545

• Manufacturer Part Number: CRT1-TS04T
• Description: CompoNet 4 Pt Thermocouple
• Manufacturer: Omron

Specifications of CRT1-TS04T

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Setting Hysteresis
OFF Delay
Setting Using the CX-Integrator
Analog I/O Slave Unit (input) Functions
1,2,3...
HH Alarm Flag or
H Alarm Flag
HH set value or
H set value
The Comparator Result Flag turns OFF when the value is lower than the hys-
teresis width (H or HH alarm occurs) or exceeds it (L or LL alarm occurs), as
shown in the following diagram. If the analog value fluctuates around the
threshold, and the flag repeatedly turns ON and OFF, set the hysteresis to
stabilize the flag operation.
The time until the Comparator Result Flag turns OFF can be extended. For
example, even if the Flag is ON momentarily, the OFF delay can be set so that
the Master Unit can receive notification of the Flag’s status.
1. Turn ON the power supply to the CompoNet Slave Unit.
2. Double-click the icon of the Slave Unit to set in the Network Configuration
3. Select the Tab Page for the input where the comparator function is to be
HH Alarm Flag
HH set value
Window to open the Configuration Window. (Alternatively, right-click the
icon and select Parameters - Edit from the pop-up menu.)
set, and select Comparator under the Function Choice heading.
LL set value or L
set value
Hysteresis width
LL Alarm Flag or
L Alarm Flag
Hysteresis width
OFF delay
Section 11-4
Hysteresis
width
521