ENW-C9A21A4EF Panasonic - ECG, ENW-C9A21A4EF Datasheet - Page 22

• Manufacturer Part Number: ENW-C9A21A4EF
• Description: RF MODULE 802.15.4 W/ANT SNAP
• Manufacturer: Panasonic - ECG
• Series: PAN4561r

Specifications of ENW-C9A21A4EF

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: General Purpose
• Power - Output: 0dBm
• Sensitivity: -92dBm
• Voltage - Supply: 2.7 V ~ 3.4 V
• Current - Receiving: 45mA
• Current - Transmitting: 43mA
• Data Interface: PCB, Surface Mount
• Memory Size: 60kB Flash, 4kB RAM
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ENW-C9A21A4EF; ENWC9A21A4EF; P14522TR; PAN4560; PAN4561L; Q5659594

CLASSIFICATION
SUBJECT
CUSTOMER’S CODE
PAN4561H /M /L
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
22.4.
22.5.
22.6.
These specifications are intended to preserve the quality assurance of products and
individual components.
Before use, check and evaluate the operation when mounted on your products. Abide by
these specifications, without deviation when using the products. These products may short-
circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are
anticipated when a short circuit occurs, then provide the following failsafe functions, as a
minimum.
(1)
(2)
(3)
(4)
(5)
(6)
(1)
(2)
(1)
(2)
(3)
(4)
(5)
STORAGE NOTES
SAFETY CAUTIONS
OTHER CAUTIONS
The module may not be stressed mechanically during storage.
Do not store these products in the following conditions or the performance
characteristics of the product, such as RF performance will be adversely
affected:
• Storage in salty air or in an environment with a high concentration of corrosive
• Storage in direct sunlight
• Storage in an environment where the temperature may be outside the range of
• Storage of the products for more than one year after the date of delivery at your
Storage period: Please check the adhesive strength of the embossed tape and
soldering after 6 months of storage.
Please keep this product away from water, poisonous gas and corrosive gas.
This product should not be stressed or shocked when transported.
Please follow the specification when stacking packed crates (max. 10).
Ensure the safety of the whole system by installing a protection circuit and a
protection device.
Ensure the safety of the whole system by installing a redundant circuit or another
system to prevent a single fault causing an unsafe status.
This specification sheet is copyrighted. Please do not disclose it to a third party.
Please do not use the products for other purposes than those listed.
Be sure to provide an appropriate fail-safe function on your product to prevent an
additional damage that may be caused by the abnormal function or the failure of
the product.
This product has not been manufactured with any ozone chemical controlled
under the Montreal Protocol.
These products are not intended for other uses, other than under the special
conditions shown below. Before using these products under such special
conditions, check their performance and reliability under the said special
conditions carefully to determine whether or not they can be used in such a
manner.
gas, such as Cl2, H2S, NH3, SO2, or NOX
5°C to 35°C range, or where the humidity may be outside the 45 to 85% range.
company if the avoidance all the above conditions (1) to (3) have been met.
• In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places
MODEM FOR 802.15.4 IEEE STANDARD
PRODUCT SPECIFICATION
PANASONIC PART NUMBER
ENWC9A22xxEF / .25xx. / .21xx.
No.
DS-4561-2400-102
PAGE
DATE
www.pedeu.pansonic.de
06.08.2010
22 of 34
REV.
G