EVAL-ADUC7060QSPZ Analog Devices Inc, EVAL-ADUC7060QSPZ Datasheet - Page 41

• Manufacturer Part Number: EVAL-ADUC7060QSPZ
• Description: Quick Start Development System
• Manufacturer: Analog Devices Inc
• Series: QuickStart™ PLUS Kitr
• Type: MCU, ARM7r

Specifications of EVAL-ADUC7060QSPZ

• Contents: Evaluation Board, Power Supply, Cable, Software, Emulator and Documentation
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: ADuC7060
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q5189809

Auxiliary ADC Control Register
Name:
Address:
Default value:
Access:
Function:
Table 42. ADC1CON MMR Bit Designations
Bit
15
14:13
12
11
10:7
Name
ADC1EN
ADC1DIAG[1:0]
HIGHEXTREF1
ADC1CODE
ADC1CH[3:0]
ADC1CON
0xFFFF0510
0x0000
Read and write
The auxiliary ADC control MMR is a 16-bit register.
This bit is set to 1 by user code to enable the auxiliary ADC.
Clearing this bit to 0 powers down the auxiliary ADC.
Auxiliary Channel ADC input select. Note: Single-ended channels are selected with respect to ADC5. Bias
Description
Auxiliary channel ADC enable.
Diagnostic current source enable bits. This is the same current source as that used on ADC0DIAG[1:0]. The
ADCs cannot enable the diagnostic current sources at the same time.
0, 0 = current sources off.
0, 1 = enables a 50 μA current source on selected positive input (for example, ADC2).
1, 0 = enables a 50 μ A current source on selected negative input (for example, ADC3).
1, 1 = enables a 50 μ A current source on both selected inputs (for example, ADC2 and ADC3).
This bit must be set high if the external reference for ADC0 exceeds 1.35 V.
Clear this bit when using the internal reference or an external reference of less than 1.35 V.
Auxiliary channel ADC output coding.
This bit is set to 1 by user code to configure auxiliary ADC output coding as unipolar.
This bit is cleared to 0 by user code to configure auxiliary ADC output coding as twos complement.
ADC5 to a minimum level of 0.1 V.
[0000] = ADC2/ADC3 (differential mode).
[0001] = ADC4/ADC5 (differential mode).
[0010] = ADC6/ADC7 (differential mode).
[0011] = ADC8/ADC9 (differential mode).
[0100] = ADC2/ADC5 (single-ended mode).
[0101] = ADC3/ADC5 (single-ended mode).
[0110] = ADC4/ADC5 (single-ended mode).
[0111] = ADC6/ADC5 (single-ended mode).
[1000] = ADC7/ADC5 (single-ended mode).
[1001] = ADC8/ADC5 (single-ended mode).
[1010] = ADC9/ADC5 (single-ended mode).
[1011] = internal temperature sensor+/internal temperature sensor−.
[1100] = VREF+, VREF−. Note: This is the reference selected by the ADC1REF bits.
[1101] = DAC_OUT/AGND.
[1110] = Undefined.
[1111] = Internal short to ADC3.
Rev. 0 | Page 41 of 100
ADuC7060