KSZ8842-16MBLI TR Micrel Inc, KSZ8842-16MBLI TR Datasheet - Page 64

• Manufacturer Part Number: KSZ8842-16MBLI TR
• Description: 2-Port Ethernet Switch + Generic (8, 16-Bit) Bus Interface (I-Temp)
• Manufacturer: Micrel Inc

Specifications of KSZ8842-16MBLI TR

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Compliant

Bank 3 Memory BIST INFO Register (0x04): MBIR
Bank 3 Global Reset Register (0x06): GRR
This register controls the global reset function with information programmed by the CPU.
Bank 3 Bus Configuration Register (0x08): BCFG
This register is a read-only register. The bit 0 is automatically downloaded from bit 0 Configparm word of EEPROM, if pin
EEEN is high (enabled EEPROM)
Banks 4 – 15: Reserved
Except Bank Select Register (0xE).
Micrel, Inc.
Bit
15-13
12
11
10-5
4
3
2-0
Bit
15-1
0
Bit
15-1
0
October 2007
Default Value
0x0000
-
Default Value
0x0
-
-
-
-
-
-
Default Value
0
0x0000
R/W
RO
RO
R/W
RO
RO
RO
RO
RO
RO
RO
R/W
RO
RW
Description
Reserved
TXMBF TX Memory Bist Finish
When set, it indicates the Memory Built In Self Test completion for the TX Memory.
TXMBFA TX Memory Bist Fail
When set, it indicates the Memory Built In Self Test has failed.
Reserved
RXMBF RX Memory Bist Finish
When set, it indicates the Memory Built In Self Test completion for the RX Memory.
RXMBFA RX Memory Bist Fail
When set, it indicates the Memory Built In Self Test has failed.
Reserved
Description
Reserved
Global Soft Reset
1: software reset is active.
0: software reset is inactive.
Software reset will affect PHY, MAC, QMU, DMA, and the switch core, only the BIU
(base address registers) remains unaffected by a software reset.
Description
Reserved
Bus Configuration (only for KSZ8842-16 device)
1: bus width is 16 bits.
0: bus width is 8 bits.
(this bit is only avaiable when EEPROM is enabled)
64
KSZ8842-16/32 MQL/MVL/MVLI/MBL
M9999-102207-1.9