KSZ8842-16MBLI TR Micrel Inc, KSZ8842-16MBLI TR Datasheet - Page 79

• Manufacturer Part Number: KSZ8842-16MBLI TR
• Description: 2-Port Ethernet Switch + Generic (8, 16-Bit) Bus Interface (I-Temp)
• Manufacturer: Micrel Inc

Specifications of KSZ8842-16MBLI TR

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Compliant

Bank 39 MAC Address Register 2 (0x02): MACAR2
This register contains the MAC address for the switch function. This MAC address is used for sending PAUSE frame.
Bank 39 MAC Address Register 3 (0x04): MACAR3
This register contains the MAC address for the switch function. This MAC address is used for sending PAUSE frame.
Bank 40 TOS Priority Control Register 1 (0x00): TOSR1
The Ipv4/Ipv6 ToS priority control registers implement a fully decoded,128-bit DSCP (Differentiated Services Code Point)
register used to determine priority from the 6-bit ToS (Type of Service) field in the IP header. The most significant 6 bits
of the ToS field are fully decoded into 64 possibilities, and the singular code that results is compared against the
corresponding bits in the DSCP register to determine the priority.
This register contains the ToS priority control for the switch function.
Micrel, Inc.
Bit
15-0
Bit
15-0
Bit
15-14
13-12
11-10
9-8
7-6
5-4
3-2
1-0
October 2007
Default
0xA1FF
Default
0xFFFF
Default
0
0
0
0
0
0
0
0
R/W
RW
R/W
RW
R/W
RW
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Description
MACA[31:16]
Specifies MAC address 2. This value has to be same as MARM in Bank2.
Description
MACA[15:0]
Specifies MAC address 3. This value has to be same as MARL in Bank2.
Description
DSCP[15:14]
The value in this field is used as the frame’s priority when bits [7:2] of it IP
TOS/DiffServ/Traffic Class value is 0x1c.
DSCP[13:12]
The value in this field is used as the frame’s priority when bits [7:2] of it IP
TOS/DiffServ/Traffic Class value is 0x18.
DSCP[11:10]
The value in this field is used as the frame’s priority when bits [7:2] of it IP
TOS/DiffServ/Traffic Class value is 0x14.
DSCP[9:8]
The value in this field is used as the frame’s priority when bits [7:2] of it IP
TOS/DiffServ/Traffic Class value is 0x10.
DSCP[7:6]
The value in this field is used as the frame’s priority when bits [7:2] of it IP
TOS/DiffServ/Traffic Class value is 0x0c.
DSCP[5:4]
The value in this field is used as the frame’s priority when bits [7:2] of it IP
TOS/DiffServ/Traffic Class value is 0x08.
DSCP[3:2]
The value in this field is used as the frame’s priority when bits [7:2] of it IP
TOS/DiffServ/Traffic Class value is 0x04.
DSCP[1:0]
The value in this field is used as the frame’s priority when bits [7:2] of it IP
TOS/DiffServ/Traffic Class value is 0x00.
79
KSZ8842-16/32 MQL/MVL/MVLI/MBL
M9999-102207-1.9