KSZ8842-PMBL AM TR Micrel Inc, KSZ8842-PMBL AM TR Datasheet - Page 85

• Manufacturer Part Number: KSZ8842-PMBL AM TR
• Description: 2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI Bus Interface( )
• Manufacturer: Micrel Inc

Specifications of KSZ8842-PMBL AM TR

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Supplier Unconfirmed

Micrel, Inc.
Port 2 Control Register 2 (Offset 0x0522): P2CR2
This register contains the global per port control for the switch port 2 function.
October 2007
Bit
Bit
15
14
13
12
11
10
2
1
0
9
reserved
Default
Default
0
0
0
0
0
0
0
1
1
reserved
R/W
R/W
RW
RW
RW
RW
RW
RW
RW
RW
RW
Description
“Diffserv” or “802.1p” classification is not enabled or fails to classify.
10 = ingress packets on port 1 will be classified as priority 2 queue if
“Diffserv” or “802.1p” classification is not enabled or fails to classify.
11 = ingress packets on port 1 will be classified as priority 3 queue if
“Diffserv” or “802.1p” classification is not enabled or fails to classify.
Note: “Diffserv”, “802.1p” and port priority can be enabled at the same
time. The OR’ed result of 802.1p and DSCP overwrites the port priority.
Tag insertion
1 = when packets are output on the port, the switch will add 802.1p/q tags
to packets without 802.1p/q tags when received. The switch will not add
tags to packets already tagged. The tag inserted is the ingress port’s “port
VID”.
0 = disable tag insertion
Tag removal
1 = when packets are output on the port, the switch will remove 802.1p/q
tags from packets with 802.1p/q tags when received. The switch will not
modify packets received without tags.
0 = disable tag removal
TX Multiple Queues Select Enable
1 = the port output queue is split into four priority queues.
0 = single output queue on the port. There is no priority differentiation
even though packets are classified into high or low priority.
Reserved
Ingress VLAN filtering
1 = the switch will discard packets whose VID port membership in VLAN
table bits [18:16] does not include the ingress port.
0 = no ingress VLAN filtering.
Discard Non PVID packets
1 = the switch will discard packets whose VID does not match ingress port
default VID.
0 = no packets will be discarded.
Force flow control
1 = will always enable flow control on the port, regardless of AN result.
0 = the flow control is enabled based on AN result.
Back pressure enable
1 = enable port’s half duplex back pressure
0 = disable port’s half duplex back pressure.
Transmit enable
1 = enable packet transmission on the port
0 = disable packet transmission on the port
Receive enable
1 = enable packet reception on the port
0 = disable packet reception on the port
Description
85
KSZ8842-PMQL/PMBL
M9999-100207-1.5