C200H-CN221 Omron, C200H-CN221 Datasheet - Page 68

• Manufacturer Part Number: C200H-CN221
• Description: C200H I/O CABLE, 2M (COO)
• Manufacturer: Omron

Specifications of C200H-CN221

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Power Supply Wiring
54
Wiring
C200H-CPU03-E
C200H-PS211
!
Caution
Tighten the AC Power Supply terminals on the terminal blocks to the torque of
0.8 N S m. Insufficient tightening may cause short-circuiting, malfunction, or
burning.
Use 1.25-mm
diameter heads and self-raising pressure plates. For connecting to the terminal
blocks, use round crimp terminals for 3.5-mm diameter heads. Directly connect-
ing stranded wires to the terminal blocks may cause a short-circuit.
Tighten the terminals on the terminal blocks to the torque of 0.8 N S m.
Screw (3.5 mm head with
self-raising pressure plate)
Screw (3.5 mm head with
self-raising pressure plate)
Voltage selector
Short: 100 to 120 VAC
Open: 200 to 240 VAC
Short-circuit these terminals
with the shorting bracket
supplied as an accessory to
select 100 to 120 VAC sup-
ply voltage. For 200 to 240
VAC, leave them open.
2
cables or larger. The terminal blocks have screws with 3.5-mm
Power line
•
pair cable (cross-section-
al area of 2 mm
Use AWG 14 twisted
Breaker
2
min).
•
•
fluctuations within
the specified range
(refer to Appendix
B Specifications )
Keep voltage
Supply 24 VDC
Section
6-4