PIC24FJ32GA102-E/SS Microchip Technology, PIC24FJ32GA102-E/SS Datasheet - Page 192

• Manufacturer Part Number: PIC24FJ32GA102-E/SS
• Description: 16-bit, 16 MIPS, 32KB Flash, 8KB RAM, Nanowatt XLP 28 SSOP .209in TUBE
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24FJ32GA102-E/SS

• Processor Series: PIC24
• Core: PIC24F
• Data Bus Width: 16 bit
• Program Memory Type: Flash
• Program Memory Size: 32 KB
• Data Ram Size: 8192 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: SSOP-28
• Development Tools By Supplier: MPLAB Integrated Development Environment
• Minimum Operating Temperature: - 40 C
• Operating Temperature Range: - 40 C to + 125 C
• Supply Current (max): 300 mA
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 21
• Eeprom Size: -
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Lead Free Status / Rohs Status: Details

PIC24FJ64GA104 FAMILY
REGISTER 18-1:
DS39951C-page 192
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12-11
bit 10
bit 9
bit 8
bit 7-6
bit 5
bit 4
bit 3
Note 1:
PMPEN
R/W-0
R/W-0
CSF1
2:
PMA<10:2> bits are not available on 28-pin devices.
These bits have no effect when their corresponding pins are used as address lines.
PMPEN: Parallel Master Port Enable bit
1 = PMP is enabled
0 = PMP is disabled, no off-chip access performed
Unimplemented: Read as ‘0’
PSIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
ADRMUX<1:0>: Address/Data Multiplexing Selection bits
11 = Reserved
10 = All 16 bits of address are multiplexed on PMD<7:0> pins
01 = Lower 8 bits of address are multiplexed on PMD<7:0> pins; upper 3 bits are multiplexed on
00 = Address and data appear on separate pins
PTBEEN: Byte Enable Port Enable bit (16-Bit Master mode)
1 = PMBE port is enabled
0 = PMBE port is disabled
PTWREN: Write Enable Strobe Port Enable bit
1 = PMWR/PMENB port is enabled
0 = PMWR/PMENB port is disabled
PTRDEN: Read/Write Strobe Port Enable bit
1 = PMRD/PMWR port is enabled
0 = PMRD/PMWR port is disabled
CSF<1:0>: Chip Select Function bits
11 = Reserved
10 = PMCS1 functions as chip set
01 = Reserved
00 = Reserved
ALP: Address Latch Polarity bit
1 = Active-high (PMALL and PMALH)
0 = Active-low (PMALL and PMALH)
Unimplemented: Read as ‘0’
CS1P: Chip Select 1 Polarity bit
1 = Active-high (PMCS1/PMCS1)
0 = Active-low (PMCS1/PMCS1)
R/W-0
CSF0
U-0
—
PMA<10:8>
PMCON: PARALLEL PORT CONTROL REGISTER
W = Writable bit
‘1’ = Bit is set
R/W-0
R/W-0
PSIDL
ALP
(2)
ADRMUX1
(2)
(2)
R/W-0
U-0
—
(1)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
ADRMUX0
R/W-0
R/W-0
CS1P
(2)
(1)
(1)
PTBEEN
R/W-0
R/W-0
BEP
 2010 Microchip Technology Inc.
x = Bit is unknown
PTWREN
WRSP
R/W-0
R/W-0
PTRDEN
R/W-0
R/W-0
RDSP
bit 8
bit 0