ADV7172KST Analog Devices Inc, ADV7172KST Datasheet - Page 40

• Manufacturer Part Number: ADV7172KST
• Manufacturer: Analog Devices Inc

Specifications of ADV7172KST

• Number Of Dac's: 6
• Adc/dac Resolution: 10b
• Screening Level: Commercial
• Package Type: LQFP
• Pin Count: 48
• Lead Free Status / RoHS Status: Not Compliant

ADV7172/ADV7173
BRIGHTNESS CONTROL REGISTERS (BCR)
(Address (SR5–SR0) = 21H)
The brightness control register is an 8-bit-wide register which
allows brightness control. Figure 66 shows the operation under
control of this register.
BCR BIT DESCRIPTION
Reserved (BCR7–BCR5)
A Logic “0” must be written to these bits.
Brightness Value (BCR4–BCR0)
These five bits represent the value required to vary the “brightness
level” or pedestal added to the luma data. The available range is
from 0 IRE to 7.5 IRE in 18 steps. A value of 18 (10010) corre-
sponds to 7.5 IRE setup level added onto the pixel data. This
brightness control is possible in both PAL and NTSC.
BCR7
PR7
TO THESE BITS
ZERO SHOULD
BE WRITTEN
BCR7–BCR5
BCR6
PR6
TO THESE BITS
ZERO SHOULD
BE WRITTEN
PR7–PR4
BCR5
PR5
BCR4
PR4
SHARPNESS RESPONSE REGISTER (PR)
(Address (SR5-SR0) = 22H)
The sharpness response register is an 8-bit-wide register. The
four MSBs are set to “0.” The four LSBs are written to in order
to select a desired filter response. Figure 67 shows the operation
under control of this register.
PR BIT DESCRIPTION
Reserved (PR7–PR4)
A Logic “0” must be written to these bits.
Sharpness Response Value (PR3–PR0)
These four bits are used to select the desired luma filter response.
The option of twelve responses is given supporting a gain boost/
attenuation in the range –4 dB to +4 dB. The value 12 (1100)
written to these four bits corresponds to a boost of +4 dB while
the value 0 (0000) corresponds to –4 dB. For normal opera-
tion these four bits are set to 6 (0110). Refer to Figures 19–21
for filter plots.
BCR3
PR3
BRIGHTNESS VALUE
BCR4–BCR0
SHARPNESS RESPONSE
BCR2
PR2
PR3–PR0
VALUE
BCR1
PR1
BCR0
PR0