5745919-2 TE Connectivity, 5745919-2 Datasheet - Page 5

• Manufacturer Part Number: 5745919-2
• Description: CABLE CLAMP KIT,SZ 2
• Manufacturer: TE Connectivity
• Type: Cable Clampr

Specifications of 5745919-2

• Rohs Compliant: YES
• Product Type: Backshell/Cable Clamp
• Cable Clamp Type: Two-Piece RFI/EMI Shield
• Shell Size: 2
• Grommets: Without
• Slide Latch: Without
• Thread Size: 4-40
• Id Letter: H
• Shielded: Yes
• Cable Exit Angle: 180°
• Cable Insulation Diameter (mm [in]): 9.53 [0.375]
• Number Of Positions: 15
• Cable Clamp Material: Die Cast
• Shield Plating: Bright Nickel over Copper
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Individual Kit

4.2.
4.3.
Rev A
Requalification Testing
Requalification shall be established by the cognizant divisional engineering function and may consist of
all or any part of the overall qualification program provided that it is conducted within the required time
period.
Quality Conformance Inspection
The applicable quality inspection plan will specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
2.
product. When product failure occurs, corrective action shall be taken and samples
resubmitted for qualification.
The lower one-sided tolerance limit for 95% confidence and 99% reliability is given by Xbar -
ks. This has a similar interpretation and corresponding application to lower requirement
values. All samples tested in accordance with this specification shall meet the stated
tolerance limit.
Failures attributed to equipment, test setup, or operator deficiencies shall not disqualify the
108-40032
5 of 6