CS4382A-DQZ Cirrus Logic Inc, CS4382A-DQZ Datasheet - Page 40

• Manufacturer Part Number: CS4382A-DQZ
• Description: IC DAC 8CH 114DB 192KHZ 48-LQFP
• Manufacturer: Cirrus Logic Inc

Specifications of CS4382A-DQZ

• Data Interface: Serial
• Number Of Bits: 24
• Number Of Converters: 8
• Voltage Supply Source: Analog and Digital
• Power Dissipation (max): 680mW
• Operating Temperature: -40°C ~ 105°C
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• Resolution (bits): 24bit
• Sampling Rate: 192kSPS
• Input Channel Type: Serial
• Supply Voltage Range - Analog: 4.75V To 5.25V
• Supply Current: 84mA
• Digital Ic Case Style: QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1524 - BOARD EVAL FOR CS4382A DAC
• Settling Time: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

40
6.6.3
6.7
Note:
6.7.1
xx_MUTE
7
0
These eight registers provide individual volume and mute control for each of the eight channels.
The values for “xx” in the bit fields above are as follows:
Register address 07h - xx = A1
Register address 08h - xx = B1
Register address 0Ah - xx = A2
Register address 0Bh - xx = B2
Register address 0Dh - xx = A3
Register address 0Eh - xx = B3
Register address 10h - xx = A4
Register address 11h - xx = B4
Volume Control (Addresses 07h, 08h, 0Ah, 0Bh, 0Dh, 0Eh)
Functional Mode (FM)
Default = 00
00 - Single-Speed Mode (4 to 50 kHz sample rates)
01 - Double-Speed Mode (50 to 100 kHz sample rates)
10 - Quad-Speed Mode (100 to 200 kHz sample rates)
11 - Direct Stream Digital Mode
Function:
Selects the required range of input sample rates or DSD Mode. All DAC pairs are required to be set to the
same functional mode setting before a speed-mode change is accepted. When DSD Mode is selected for
any channel pair, all pairs switch to DSD Mode.
Mute (MUTE)
Default = 0
0 - Disabled
1 - Enabled
Function:
The Digital-to-Analog converter output will mute when enabled. The quiescent voltage on the output will
be retained. The muting function is affected, similarly to attenuation changes, by the Soft and Zero Cross
bits. The MUTE pins will go active during the mute period according to the MUTEC bit.
xx_VOL6
6
0
xx_VOL5
5
0
xx_VOL4
4
0
xx_VOL3
3
0
xx_VOL2
2
0
xx_VOL1
1
0
CS4382A
xx_VOL0
DS618F2
0
0