EP1S25F1020C5N Altera, EP1S25F1020C5N Datasheet - Page 131

• Manufacturer Part Number: EP1S25F1020C5N
• Description: IC STRATIX FPGA 25K LE 1020-FBGA
• Manufacturer: Altera
• Series: Stratix®r

Specifications of EP1S25F1020C5N

• Number Of Logic Elements/cells: 25660
• Number Of Labs/clbs: 2566
• Total Ram Bits: 1944576
• Number Of I /o: 706
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 1020-FBGA
• Family Name: Stratix
• Number Of Logic Blocks/elements: 25660
• # I/os (max): 706
• Frequency (max): 500MHz
• Process Technology: 0.13um (CMOS)
• Operating Supply Voltage (typ): 1.5V
• Logic Cells: 25660
• Ram Bits: 1944576
• Operating Supply Voltage (min): 1.425V
• Operating Supply Voltage (max): 1.575V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 1020
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant

Altera Corporation
July 2005
Notes to
(1)
(2)
(3)
(4)
(5)
DDR SDRAM (1),
DDR SDRAM - side banks (2),
QDR SRAM
QDRII SRAM
ZBT SRAM
EP1S10
EP1S20
Table 2–26. External RAM Support in EP1S60 & EP1S80 Devices
Table 2–27. DQS & DQ Bus Mode Support
Device
These maximum clock rates apply if the Stratix device uses DQS phase-shift circuitry to interface with DDR
SDRAM. DQS phase-shift circuitry is only available in the top and bottom I/O banks (I/O banks 3, 4, 7, and 8).
For more information on DDR SDRAM, see AN 342: Interfacing DDR SDRAM with Stratix & Stratix GX Devices.
DDR SDRAM is supported on the Stratix device side I/O banks (I/O banks 1, 2, 5, and 6) without dedicated DQS
phase-shift circuitry. The read DQS signal is ignored in this mode. Numbers are preliminary.
For more information on QDR or QDRII SRAM, see AN 349: QDR SRAM Controller Reference Design for Stratix &
Stratix GX Devices.
For more information on ZBT SRAM, see AN 329: ZBT SRAM Controller Reference Design for Stratix & Stratix GX
Devices.
DDR Memory Type
Table
(5)
(4)
(4)
2–26:
672-pin BGA
672-pin FineLine BGA
484-pin FineLine BGA
780-pin FineLine BGA
484-pin FineLine BGA
672-pin BGA
672-pin FineLine BGA
780-pin FineLine BGA
(2)
Package
In addition to six I/O registers and one input latch in the IOE for
interfacing to these high-speed memory interfaces, Stratix devices also
have dedicated circuitry for interfacing with DDR SDRAM. In every
Stratix device, the I/O banks at the top (I/O banks 3 and 4) and bottom
(I/O banks 7 and 8) of the device support DDR SDRAM up to 200 MHz.
These pins support DQS signals with DQ bus modes of ×8, ×16, or ×32.
Table 2–27
per device.
(3)
SSTL-2
SSTL-2
1.5-V HSTL
1.5-V HSTL
LVTTL
I/O Standard
shows the number of DQ and DQS buses that are supported
(Part 1 of 2)
Number of ×8
Groups
12
16
18(4)
16(3)
-5 Speed Grade
20
(2)
(3)
Note (1)
167
150
133
167
200
Maximum Clock Rate (MHz)
Number of ×16
Groups
Stratix Device Handbook, Volume 1
7
7
7
-6 Speed Grade -7 Speed Grade
0
0
(5)
(5)
(5)
167
133
133
167
200
Number of ×32
Stratix Architecture
Groups
0
4
4
4
4
133
133
133
133
167
2–117