EP2S180F1020C5 Altera, EP2S180F1020C5 Datasheet - Page 18

• Manufacturer Part Number: EP2S180F1020C5
• Description: IC STRATIX II FPGA 180K 1020-FBG
• Manufacturer: Altera
• Series: Stratix® IIr

Specifications of EP2S180F1020C5

• Number Of Logic Elements/cells: 179400
• Number Of Labs/clbs: 8970
• Total Ram Bits: 9383040
• Number Of I /o: 742
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 1020-FBGA
• Family Name: Stratix II
• Number Of Logic Blocks/elements: 179400
• # I/os (max): 742
• Frequency (max): 609.76MHz
• Process Technology: 90nm (CMOS)
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 179400
• Ram Bits: 9383040
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 1020
• Package Type: FC-FBGA
• For Use With: 544-1701 - DSP PRO KIT W/SII EP2S180N
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant
• Other names: 544-1463

Adaptive Logic Modules
2–10
Stratix II Device Handbook, Volume 1
synchronous load, and clock enable control for the register. These LAB-
wide signals are available in all ALM modes. See the
Signals”
The Quartus II software and supported third-party synthesis tools, in
conjunction with parameterized functions such as library of
parameterized modules (LPM) functions, automatically choose the
appropriate mode for common functions such as counters, adders,
subtractors, and arithmetic functions. If required, you can also create
special-purpose functions that specify which ALM operating mode to use
for optimal performance.
Normal Mode
The normal mode is suitable for general logic applications and
combinational functions. In this mode, up to eight data inputs from the
LAB local interconnect are inputs to the combinational logic. The normal
mode allows two functions to be implemented in one Stratix II ALM, or
an ALM to implement a single function of up to six inputs. The ALM can
support certain combinations of completely independent functions and
various combinations of functions which have common inputs.
Figure 2–7
section for more information on the LAB-wide control signals.
shows the supported LUT combinations in normal mode.
“LAB Control
Altera Corporation
May 2007