MC7448HX1250ND Freescale Semiconductor, MC7448HX1250ND Datasheet - Page 4

• Manufacturer Part Number: MC7448HX1250ND
• Description: IC MPU RISC 32BIT 360-FCCBGA
• Manufacturer: Freescale Semiconductor

Specifications of MC7448HX1250ND

• Processor Type: MPC74xx PowerPC 32-Bit
• Speed: 1.25GHz
• Voltage: 1.1V
• Mounting Type: Surface Mount
• Package / Case: 360-FCCBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -

General Parameters
4
5.1
Table 4
4
Core supply
voltage
PLL supply voltage
Notes:
1. These are the recommended and tested operating conditions. Some speed grades in addition support voltage derating; see
2. This voltage is the input to the filter discussed in
3. V
4. Effective for 1400 MHz devices with date code of 0613 and later; this includes all devices with the ‘PPC’ product code. V
Characteristic
Section 5.3, “Voltage and Frequency Derating.”
Section 5.3, “Voltage and Frequency Derating,”
and not necessarily the voltage at the AV
observed. See
and AV
Numbering and Marking,”
DD
Core power supply
Note: See
specifications for 1400 MHz devices.
provides the recommended operating conditions for the MPC7448 part numbers described here.
and AV
General Parameters
DD
DC Electrical Characteristics
were specified at 1.1V ± 50 mV for 1400 MHz devices with date code 0612 and prior. See
DD
MPC7448 Hardware Specifications Addendum for the MC7448xxnnnnNx Series, Rev. 6
Table 4
information on the operation of the device at supported derated core voltage
conditions, see
Section 5.3, “Voltage and Frequency Derating,”
may be reduced in order to reduce power consumption if further maximum core frequency constraints are
Section 5.1, “DC Electrical Characteristics,”
Symbol
AV
V
DD
DD
describes the nominal operating conditions of the device. For
for more information.
Table 4. Recommended Operating Conditions
1.0 V ± 50 mV
1.0 V ± 50 mV
Section 5.3, “Voltage and Frequency Derating.”
1000 MHz
600 MHz,
667 MHz,
800 MHz,
867 MHz,
1.15 V
1.1 V
1.05 V
1.0 V
DD
pin, which may be reduced from V
Proper device operation outside of these conditions and those specified in
is not guaranteed.
Section 9.2.2, “PLL Power Supply Filtering,”
Revision Level C
1.1 V ± 50 mV
1.1 V ± 50 mV
for 1267 only
1267 MHz
1250 MHz,
(1400 MHz devices)
(1267, 1250 MHz devices)
(1267 MHz revision level D devices only, See
(1000, 867, 800, 667, 600 MHz devices)
Recommended Value
NOTE
3
for specific information.
1.05 V ± 50 mV
1.05 V ± 50 mV
1267 MHz
Level D only
Revision
for information regarding V
DD
3
by the filter.
1.15 V ± 50 mV
1.15 V ± 50 mV
1
1400 MHz
in the hardware specifications
Freescale Semiconductor
3, 4
Section 11, “Part
Unit
DD
V
V
Table
Notes
2
17.)
DD