CS8952-IQZ Cirrus Logic Inc, CS8952-IQZ Datasheet - Page 51

• Manufacturer Part Number: CS8952-IQZ
• Description: IC TXRX 100/10 PHY 100TQFP
• Manufacturer: Cirrus Logic Inc
• Type: Transceiverr

Specifications of CS8952-IQZ

• Package / Case: 100-TQFP, 100-VQFP
• Protocol: MII
• Voltage - Supply: 4.75 V ~ 5.25 V
• Mounting Type: Surface Mount
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Product: Ethernet Transceivers
• Number Of Transceivers: 1
• Standard Supported: 100BASE-FX or 100BASE-TX or 10BASE-T
• Data Rate: 10 Mbps or 100 Mbps
• Supply Voltage (max): 6 V
• Supply Voltage (min): - 0.3 V
• Supply Current (max): +/- 10 mA
• Maximum Operating Temperature: + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Drivers/receivers: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 598-1208

6.15
CrystalLAN™ 100BASE-X and 10BASE-T Transceiver
DS206F1
15
14:11 Reserved
10:0
BIT
Load
15
7
Load
Descrambler Initial-
ization Key
Descrambler Key Initialization Register - Address 16h
NAME
14
6
Read/Set
Read Only 0000
Read/Write Reset value is
TYPE
13
5
Reserved
0
dependent on the
PHY Address field
of the Self Status
Register (address
19h).
Descrambler Initialization Key
RESET
12
4
When this bit is set, the descrambler will be loaded
with the value in the Descrambler Initialization Key
field. When the load is complete, this bit will clear
automatically.
These bits should be read as don’t cares and, when
written, should be written to 0.
This register allows the Descrambler to be loaded
with a user-definable key sequence. A value of 000h
has the effect of bypassing the descrambler function.
This is valuable for testing purposes to allow a deter-
ministic response to test stimulus without a synchro-
nization delay.
Note: This field is disabled, and writes to this bit are
ignored when the National Compatibility Mode bit of
the 10BASE-T Configuration Register (address 1Ch)
is set.
11
3
10
2
Descrambler Initialization Key
DESCRIPTION
9
1
CS8952
8
0
51