DP83848IVV/NOPB National Semiconductor, DP83848IVV/NOPB Datasheet - Page 53

• Manufacturer Part Number: DP83848IVV/NOPB
• Description: IC TXRX ETHERNET PHYTER 48-LQFP
• Manufacturer: National Semiconductor
• Type: Transceiverr

Specifications of DP83848IVV/NOPB

• Number Of Drivers/receivers: 1/1
• Protocol: Ethernet
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• For Use With: POEPHYTEREV-I - BOARD EVAL LM5072, DP83848IPOEPHYTEREV-E - BOARD EVAL LM5072, DP83848IDP83848I-POE-EK - BOARD EVALUATION DP83848IDP83848I-MAU-EK - BOARD EVALUATION DP83848I
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: *DP83848IVV; *DP83848IVV/NOPB; DP83848IVV; DP83848IVVNOPB; DP83848IVVNOPB; DP83848IVVNOPBTR; DP83848IVVNOPBTR

7.2.3 MII Interrupt Status and Misc. Control Register (MISR)
This register contains event status and enables for the interrupt function. If an event has occurred since the last read of
this register, the corresponding status bit will be set. If the corresponding enable bit in the register is set, an interrupt
will be generated if the event occurs. The MICR register controls must also be set to allow interrupts. The status indi-
cations in this register will be set even if the interrupt is not enabled
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
LINK_INT_EN
DUP_INT_EN
ANC_INT_EN
SPD_INT_EN
FHF_INT_EN
RHF_INT_EN
RESERVED
ED_INT_EN
Table 23. MII Interrupt Status and Misc. Control Register (MISR), address 0x12
LINK_INT
Reserved
DUP_INT
ANC_INT
SPD_INT
RHF_INT
FHF_INT
ED_INT
0, RO/COR
0, RO/COR
0, RO/COR
0, RO/COR
0, RO/COR
0, RO/COR
0, RO/COR
0, RW
0, RW
0, RW
0, RW
0, RW
0, RW
0, RW
0, RO
0, RO
RESERVED: Writes ignored, Read as 0
Energy Detect interrupt:
1 = Energy detect interrupt is pending and is cleared by the current
read.
0 = No energy detect interrupt pending.
Change of Link Status interrupt:
1 = Change of link status interrupt is pending and is cleared by the
current read.
0 = No change of link status interrupt pending.
Change of speed status interrupt:
1 = Speed status change interrupt is pending and is cleared by the
current read.
0 = No speed status change interrupt pending.
Change of duplex status interrupt:
1 = Duplex status change interrupt is pending and is cleared by
the current read.
0 = No duplex status change interrupt pending.
Auto-Negotiation Complete interrupt:
1 = Auto-negotiation complete interrupt is pending and is cleared
by the current read.
0 = No Auto-negotiation complete interrupt pending.
False Carrier Counter half-full interrupt:
1 = False carrier counter half-full interrupt is pending and is
cleared by the current read.
0 = No false carrier counter half-full interrupt pending.
Receive Error Counter half-full interrupt:
1 = Receive error counter half-full interrupt is pending and is
cleared by the current read.
0 = No receive error carrier counter half-full interrupt pending.
RESERVED: Writes ignored, Read as 0
Enable Interrupt on energy detect event
Enable Interrupt on change of link status
Enable Interrupt on change of speed status
Enable Interrupt on change of duplex status
Enable Interrupt on Auto-negotiation complete event
Enable Interrupt on False Carrier Counter Register half-full event
Enable Interrupt on Receive Error Counter Register half-full event
53
www.national.com