TLE6250PG Infineon Technologies, TLE6250PG Datasheet - Page 9

• Manufacturer Part Number: TLE6250PG
• Description: IC TXRX CAN STD HI SPEED DSO-8
• Manufacturer: Infineon Technologies
• Type: Transceiverr

Specifications of TLE6250PG

• Package / Case: DSO-8
• Number Of Drivers/receivers: 1/1
• Protocol: CAN
• Voltage - Supply: 4.5 V ~ 5.5 V
• Mounting Type: Surface Mount
• Product: Controller Area Network (CAN)
• Number Of Transceivers: 1
• Data Rate: 1 MBd
• Supply Voltage (max): 6.5 V
• Supply Voltage (min): - 0.3 V
• Supply Current (max): 45 mA
• Maximum Operating Temperature: + 150 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: SP000055308; SP000268119; TLE6250PG; TLE6250PGINTR; TLE6250PGXT; TLE6250PGXT

TLE6250
In the normal mode the device is able to receive and to transmit messages whereas in
the receive-only mode signals at the TxD input are not transmitted to the CAN bus. The
receive-only mode can be used for diagnostic purposes (to check the bus connections
between the nodes) as well as to prevent the bus being blocked by a faulty permanent
dominant TxD input signal. The stand-by mode is a low power mode that disables both,
the receiver as well as the transmitter.
In case the receive-only feature is not used the RM pin has to be left open. When the
stand-by mode is not used the INH pin has to be connected to ground level in order to
switch the TLE6250G in normal mode.
Application Information for the 3.3 V Versions
The TLE6250GV33 can be used for both; 3.3 V and 5 V microcontroller logic supply, as
shown in
Figure
6. Don’t apply external resistors between the power supply and this pin.
This may cause a voltage drop and so reduce the available voltage at this pin.
Data Sheet
9
Rev. 3.9, 2007-08-22